| 應用領域 |
建材/家具,電子/電池,道路/軌道/船舶,電氣 |
類型 |
手持式數顯 |
| 精度 |
0.1mpa |
GlasStress 便攜式智能應力分析儀SCALP-05采用偏振激光散射光測彈性技術. 高效率偏振激光. 可測量大多數玻璃類型 可以現場測量已安裝玻璃。SCALP-05便攜式玻璃應力儀英文版技術參數
技術指標：
| 型號 | SCALP-05 |
| 測量厚度范圍 | 1~5mm |
| 測量表面壓力范圍 | >1.0Mpa |
| 測量精度 | <1MPa （表面應力<4MPa） |
| <5%（其他情況） |
|
| 可測量玻璃 | 平面和曲面玻璃（r>300mm） |
| 可測量表面 | 空氣面、錫面,、壓花 |
| 激光波長 | 635nm |
| 激光輸出功率 | 5mW |
| PC配置要求 | Windows Vista?7?8及以上NET Framework 4.5 |
| PC接口 | USB2.0 |
| 操作溫度 | 10~50℃ |
| 操作濕度 | 0~90%相對濕度（無冷凝） |
| 限制條件 | 不能直接測量Low-E膜面a減反射膜面、絲網印面測量時陽光避免直射 |
| 外形尺寸 | 56mmx27.5mmx76mm |
| 重量 | <250g |
SCALP-05 is a compact scattered light polariscope for depthwise stress measurement in sheet glass. SCALP-05 contains diode laser, optics and camera. Recording of the data and stress calculation is done by PC, connected over USB. Handling of the polariscope is simple – clean the glass, apply a drop of immersion liquid, place SCALP onto the same spot and click the start button in software. After 3 seconds the stress profile is shown on the screen of PC.
Dimensions (L*W*H): 56*28*76 mm
Weight: 177 g
Communication interface: USB 2.0
Power supply: USB bus
Power consumption: 1.0 W
Laser wavelength: 635 nm
Laser output power:<5 mW
Sensor resolution: 1280*1024 pixels
Software requirements: Windows 10, .NT 4.6
Measurable glass: Flat and curved glass (r > 300 mm)
Measurable surface: Air and tin side
Minimum measurable thickness:<1 mm
Maximum measurable depth: 6 mm (on glass with any thickness)
Measurement time: 1-6 seconds, default 3 seconds
Minimum surface stress: 1 MPa
Maximum stress: Not limited
Precision:<1 MPa if surface stress < 4 MPa, <5% otherwise
Operating conditions: +10 … +50 °C (with some thermal isolation down to -10 °C)
Humidity: 0 – 90 % R.H. (non-condensing)
Ambient light: Direct sunlight must be avoided
Calibration: Calibrated by manufacturer
Warranty: 2 years
Limitations: some coatings (low-E, reflective, etc.), covered or painted surfaces, surfaces with texture
化工儀器網