材料試驗機中伺服電機電纜

Universal material testing machine servo motor cable

1：保證電纜不因外部彎曲力或自身重量而受到力矩或垂直負荷,，尤其是在電纜出口處或連接處,。

1: to ensure the cable not because of external bending force or its weight by the torque or vertical load, especially in the cable outlet or junction.

2：在伺服電機移動的情況下,，應把電纜(就是隨電機配置的那根)牢固地固定到一個靜止的部分(相對電機),，并且應當用一個裝在電纜支座里的附加電纜來延長它,，這樣彎曲應力可以減到zui小,。

2: in the case of the servo motor moves, should the cable (that is configured with the motor Flanagan) is firmly fixed to a stationary part (corresponding to a motor) and to extend it, shall be installed in the cable with a bearing in the attached cable, so that the bending stress can be reduced to the minimum.

3：電纜的彎頭半徑做到盡可能大,。

3: cable bend radius be as large as possible.

材料試驗機中確定伺服電機允許的軸端負載

Determination of the servo motor allows the shaft load of universal material testing machine

1：保證在安裝和運轉時加到伺服電機軸上的徑向和軸向負載控制在每種型號的規定值以內。

1: the guarantee in the installation and operation to the servo motor shaft in radial and axial load control in the specified value for each model.

2：在安裝一個剛性聯軸器時要格外小心,，特別是過度的彎曲負載可能導致軸端和軸承的損壞或磨損

2: be careful when installing a rigid coupling, especially the bending load may lead to damageshaft and bearing or worn

3：用柔性聯軸器,，以便使徑向負載低于允許值，此物是專為高機械強度的伺服電機設計的,。

3: the best use of flexible coupling, so that the radial load is lower than the allowable value, itis specially designed for the high mechanical strength of the servo motor.

4：關于允許軸負載,，請參閱“允許的軸負荷表”(使用說明書),。

4: the axial load on the permit, please refer to "allow the axle load table" (manual).

1.電子試驗機www.hssdtest.com
2.材料試驗機www.hssdtest.net
3.金屬拉力試驗機www.hstyq.cn