上海圻明生物試劑（KA&M試劑）專業(yè)供應(yīng)人磷脂酰乙醇胺抗體（PE Ab）檢測(cè)試劑盒,。

Human phosphatidyl ethanolamine Ab

FOR RESEARCH USE ONLY

Assay range：5pg/ml-130pg/ml 96 determinations

Purpose

This kit allows for the determination of PE Ab concentrations in Human serum, cell

culture supernates and other biological fluids

Principle of the assay

The kit assay Human PE Ab level in the sample, use Purified antigen to coat microtiter

plate wells, make solid-phase antigen, then add PE Ab to wells, Combined antigen which With

HRP labeled, become antigen – antibody - enzyme-antigen complex, after washing Compley,

Add TMB substrate solution,TMB substrate becomes blue color At HRP enzyme-catalyzed,

reaction is terminated by the addition of a sulphuric acid solution and the color change is

measured spectrophotometrically at a wavelength of 450 nm. The concentration of Human PE

Ab in the samples is then determined by comparing the O.D. of the samples to the standard

curve.

Materials provided with the kit

1 wash solution 20ml×1bottle 7 Stop Solution 6ml×1 bottle

2 HRP-Conjugate reagent 6ml×1 bottle 8

Standard

（240pg/ml）

0.5ml×1 bottle

3 Microelisa stripplate 12well×8strips 9 Standard diluent 1.5ml×1bottle

4 Sample diluent 6ml×1 bottle 10 Instruction 1

5 Chromogen Solution A 6ml×1 bottle 11

Closure plate

membrane

2

6 Chromogen Solution B 6ml×1 bottle 12 Sealed bags 1

Specimen requirements

1. extract as soon as possible after Specimen collection,and according to the relevant

2

literature, and should be experiment as soon as possible after the extraction. If it can’t,

specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze-thaw cycles.

2. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP active.

Assay procedure

1. Dilute and add sample:Dilute Original density Standard as follow table:

120pg/ml 5 Standard 150μl Original density Standard+150μl Standard diluent

60pg/ml 4 Standard 150μl 5 Standard+150μl Standard diluent

30pg/ml 3 Standard 150μl 4 Standard+150μl Standard diluent

15pg/ml 2 Standard 150μl 3 Standard +150μl Standard diluent

7.5pg/ml 1 Standard 150μl 2 Standard +150μl Standard diluent

2.add sample：Set blank wells separay （blank comparison wells don’t add sample and

HRP-Conjugate reagent, other each step operation is same）. testing sample well. add Sample

dilution 40μl to testing sample well, then add testing sample 10μl （sample final dilution is

5-fold）, add sample to wells , don’t touch the well wall as far as possible, and Gently mix.

3.Incubate: After closing plate with Closure plate membrane ,incubate for 30 min at 37℃.

4.Configurate liquid: 30-fold（or 20-fold） wash solution diluted 30-fold （or 20-fold） with distilled

water and reserve.

5.washing：Uncover Closure plate membrane, discard Liquid, dry by swing, add washing buffer

to every well, still for 30s then drain, repeat 5 times, dry by pat.

6.add enzyme：Add HRP-Conjugate reagent 50μl to each well, except blank well.

7.incubate：Operation with 3.

8.washing：Operation with 5.

9.color：Add Chromogen Solution A 50ul and Chromogen Solution B 50ul to each well, evade

the light preservation for 10 min at 37℃

10.Stop the reaction：Add Stop Solution50μl to each well, Stop the reaction（the blue color

change to yellow color）.

11.assay：take blank well as zero , Read absorbance at 450nm after Adding Stop Solution and

within 15min.

3

Steps description

Standard, Sample diluent

Add Standard, Sample diluent, incubate for 30 min at 37℃.

Wash 5 time,Add HRP-Conjugate reagent, incubate for 30 min at 37℃.

Wash 5 times,Add Chromogen Solution A and B, incubate for 10 min at 37℃.

Add Stopp Solution

Read absorbance at 450nm within 15 min

calculate

Calculate

Take the standard density as the horizontal, the OD value for the vertical ,draw the

standard curve on graph paper, Find out the corresponding density according to the sample

OD value by the Sample curve, multiplied by the dilution multiple, or calculate the straight line

regression equation of the standard curve with the standard density and the OD value ,with the

4

sample OD value in the equation, calculate the sample density, multiplied by the dilution factor,

the result is the sample actual density.

Important notes

1. The kit takes out from the refrigeration environment should be balanced 15-30 minutes in

the room temperature, ELISA plates coated if has not use up after opened, the plate should

be stored in Sealed bag.

2. washing buffer will Crystallization separation, it can be heated the water helps dissolve

when dilute . Washing does not affect the result.

3. add Sample with sampler Each step, And proofread its accuracy frequently, avoids the

experimental error. add sample within 5 min, if the number of sample is much , recommend

to use Volley .

4. if the testing material content is excessively higher （The sample OD is bigger than the first

standard well ）,please dilute Sample （n-fold）, Please diluente and multiplied by the dilution

factor.（×n×5）.

5. Closure plate membrane only limits the disposable use, to avoid cross-contamination.

6. The substrate evade the light preservation.

7. Please according to use instruction strictly, The test result determination must take the

microtiter plate reader as a standard.

8. All samples, washing buffer and each kind of reject should according to infective material

process.

9. Do not mix reagents with those from other lots.

Storage and validity

1．Storage： 2-8℃.

2．validity： six months