本頁面標準信息均來源于網絡收集,，或由參與標準制定的供應商提供,，只作為參考使用,，為確保測試結果的準確性,、節省您的時間,，如需Volvo VCS-1027, 149標準詳細信息或Volvo VCS-1027, 149具體測試方法,，歡迎與我們技術人員聯系或給我們留言,，我們將為您相關的技術支持。

Volvo VCS-1027, 149標準介紹

Volvo VCS-1027, 149英文簡介

This standard defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt. It specifies a test procedure to be used in conducting the accelerated corrosion test to simulate atmospheric corrosion conditions in a controlled way.

The one-week main test cycle is composed of two twelve-hour sub-cycles, one with controlled humidity cycling; sub-cycle 1, the other including salt solution application, sub-cycle 2.

Sub cycle 1 requires constant conditions at 35°C & 95% RH for 4 h, followed by an increase of temperature to 45°C whilst reducing the humidity to 50% over a 2 hour period. This is followed by constant conditions of 45°C & 50% RH for 4 h, together with a 2 hour period of 35°C & 95%RH. Step 1:4) Temperature decrease from 45°C to 35°C.

Sub cycle 2 requires spraying with salt solution for 15 mins then keeping the samples at 35°C for 1 h 45 min whilst maintaining a set point of 95% - 99% RH in such a way that the test objects remain wet. These steps are repeated in sequence to give a total period of 6 hours. Drying at 45°C & 50% RH for a 2 hour period followed by a further 2 hour period of 35°C whilst maintaining 95% RH.

This test is also referred to as a Cyclic Corrosion Test, often abbreviated to CCT.

Q-fog鹽霧試驗箱用于Volvo VCS-1027, 149 鹽霧測試的流程

▼Volvo VCS-1027, 149第三方檢測機構

以上標準信息來自互聯網搜索整理,，如需了解完整的Volvo VCS-1027, 149的信息或Volvo VCS-1027, 149標準解讀,，歡迎詳詢。