專業銷售Lindberg CF56724C 坩堝馬弗爐返回列表頁

舉報評價

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地北京市

在線詢價加入對比查看聯系電話

更新時間：2025-06-16 09:00:08瀏覽次數：9次

聯系我時,，請告知來自化工儀器網

產品分類品牌分類

儀器儀表: 便攜式歐姆表便攜式天平水分平衡儀磁力攪拌器顯微鏡其他千分尺

全部產品列表

產品簡介

專業銷售Lindberg CF56724C 坩堝馬弗爐

詳情介紹

歡迎前來詢價

北京恒遠安諾生化科技有限公司

www.annovatek.com

：

： nickqian8888

：錢

www.annovatek.com

High Temperature, Top or Bottom Loading, Independent Control

The Model CF56724C Crucible Furnace is used for high temperature research under three methods of processing: air, controlled atmosphere, or vertical tube orientation using an interchangeable vestibule as an insulating sleeve （which requires a vertical tube adaptation kit）. Graduated density Moldatherm® insulation combined with a unique right-angle bend heating element, sidewall mounted, delivers excellent chamber uniformity, fast heat-up and recovery, and energy conserving performance.

Features

Chamber is accessed by top or bottom with manually operated lifting mechanism; work load may be raised and lowered with convenience and safety

Long-life molybdenum disilicide heating elements resist thermal shock, withstand rapid cycling over extended periods

Individual elements easily replaceable without matching resistance values

Elements mounted on four sides of chamber for fast response and recovery

Forced-air blowers circulate ambient air throughout the double-wall crucible cabinet to minimize exterior surface temperature

Long-life Type "B" thermocouple for accurate high temperature measurement. Includes 10' compensated lead wire with polarized plug

Requires independent controller （ordered separay）

Optional 1700°C Controller, Programmable, With Communications

Lindberg/Blue M 1700°C Programmable Controllers provide multiple programs and multiple segments for ramp （up and down） and dwell （timed hold） temperature control. The controller visually displays ramp rate, dwell time, program segment and percent power output. A holdback feature allows the operator to set a "process vs setpoint" temperature value which, when exceeded, holds the program to allow the process to catch up.

The controller includes a selectable self-tuning feature which sets the best PID settings for the thermal process. Two digital displays simultaneously indicate actual temperature and setpoint temperature. High limit overtemperature protection is standard. The control console includes a circuit breaker, power module, transformer and cooling fans.

Controllers include RS485 data port （communications card and port） for connection to remote computer, allowing modification, interrogation and data transfer of all instrument control and configuration parameter. Up to 30 units can be connected to one PC. Software is not included, but is available as an option.

Optional Overtemperature Control （OTC）

Adjustable digital overtemperature control, factory installed on selected control consoles with "B" suffix designation. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via signal from independent thermocouple.

Processing Options

In addition to air processing, the 1700°C crucible furnace can be used for atmosphere processing using an inverted ceramic crucible （included） over the load forming a muffle. Inert gas is supplied through inlet and outlet tubes （customer supplied）. Gas flow is controlled via an adjustable N2 flowmeter, included.

For use in a vertical tube configuration, either air or controlled atmosphere processing, the furnace requires an optional Adaptation Kit （see Accessories） ordered to match the size of the desired process tube （customer supplied）.

Notes

Required Accessories: Required power cord, hardwiring and interconnecting wiring are not included

Specifications:

Lindberg/Blue M - CF56724C
Min Temperature	500 °C / 932 °F
Max Temperature	1700 °C / 3092 °F
Chamber Dimensions （Width x Height x Depth）	6.5" （Top） - 5" （Bottom） cm Opening ID x 6.5" Depth ID" / 16.5 （Top） - 12.7 （Bottom） cm Opening ID x 16.5 cm Depth ID cm
Power	208/240 V / 23 A / 5000 W
Controller	Independent
Temperature Range	500°C to 1700°C / 932°F to 3092°F
Vestibule Top Opening ID	6.5" / 16.5 cm
Vestibule Bottom Opening ID	5" / 12.7 cm
Working Depth ID	6.5" / 16.5 cm
Chamber Uniformity Over Center 5.5" Heated Chamber Length	±1°C at 1700°C （no atmosphere）
Display	LED; temperature and setpoint in °C or °F
Hertz	50/60
Overall Dimensions （Width x Height x Depth）	35.5 x 20 x 19.5" / 90.2 X 50.8 X 49.6 cm
Shipping Weight	250 lb / 114 kg