1070Change of the PWM frequency not possible. PWM frequency change is in progress.無法更改PWM頻率,。PWM頻率更改正在進行中,。
包米勒伺服驅動器常見故障維修：
Effect: The new set PWM frequency is not accepted.
影響：不接受新設置的PWM頻率,。
The error can be caused:
錯誤可能由以下原因引起：
1 The previous PWM frequency change is in progress.
上一次PWM頻率更改正在進行中,。
Remedy: Reduce the cycle of the PWM change or implement a function into the master control which enables a PWM change only after the previous change was completed.
補救措施：減少PWM更改的周期,，或在主控制中執行一項功能,，該功能僅在完成前一次更改后才能啟用PWM更改,。
1 The PWM frequency redurction of the power unit temperature
model is active (warning 216).功率單元溫度的PWM頻率降低
模型處于活動狀態（警告216）,。
Remedy: Monitoring of warning 216 via master control. If warning
216 is active no PWM change is initiated.
補救措施：通過主控監控警告216,。如果警告216是激活的，沒有啟動PWM改變。
BUS6-VC-EE-0001鮑米勒驅動器主板故障維修,，
包米勒Baumuller BUS6-VC-AO-0002-0000維修中心,，
鮑米勒變頻器BUM62F-75/97.5-54-M-041缺相故障維修，
BM4444-SI0-01243-03包米樂電源缺相亮故障燈維修,，
BUM60B-VC-A0-1082維修 鮑米勒驅動器控制器報警維修
(空格分隔,最多3個,單個標簽最多10個字符)
會員.png)
8