9
SKC旋風采樣器
旋風采樣器是專為粉塵（氣溶膠）抽樣呼吸公約中定義的標準en481:1993,，使用14 / 3“HSE方法分為一般方法和重采樣,，分析的吸入和可吸入塵“,。
SKC旋風采樣器是高度推薦的獲得和讀取文件中的14／3，進行任何使用旋風采樣器在采樣,。
設計流量為2.2升/分鐘,，在4μm（微米）的顆粒大小，給出了一個50%的采樣效率（切點）
美國SKC的塑料旋風從導電塑料消耗周圍大氣制造的電荷,，防止靜電干擾塵埃粒子的收集,。
保持在一個可重復使用的塑料盒，這是提供完整的金屬過濾器支持
網格和密封夾,，以防止樣品在運輸過程中的實驗室分析污染,。
有關空氣取樣的詳細說明，特別是旋風采樣器的使用,。
訂貨號：
| Description | Pack Size | Part Number |
| Cyclone cassette 25 mm for use with 225-69 | Each | 225-62 |
| Cyclone cassette 37 mm for use with 225-69-37 | Each | 225-62-37 |
| Rubber grit pots | 10 | 225-64 |
| Stainless steel grids without tab 25 mm for use with 225-69 | 10 | 225-66 |
| Stainless steel grids without tab 37 mm for use with 225-69-37 | 10 | 225-66-37 |
| Filter transport cassette 25 mm | Each | 225-67 |
| DPM plastic cyclone 37 mm | Each | 225-68 |
| Plastic cyclone with 25 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69 |
| Plastic cyclone with 37 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69-37 |
| O-rings for Plastic Cyclone (set of 3) | Each | P22569 |
| DPM cassette with 0.8 µm impactor | 10 | 225-317 |
| Without impactor, standard 3-piece clear styrene cassette loaded with 37 mm heat-treated quartz filter, support pad, banded, meets NIOSH 5040 specifications | 50 | 225-401 |
| GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 37 mm | Each | 225-100 |
| GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 25 mm | Each | 225-103 |
| GS-1 Single-inlet Cyclone includes bowl adapter, 37 mm cassette adapter, and grit pot | Each | 225-105 |
| Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 25 mm | Each | 225-101 |
| Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 37 mm | Each | 225-102 |
| Three-piece Filter Cassette Blanks 37 mm | 10 | 225-3LF |
| Three-piece Filter Cassette Blanks 25 mm | 50 | 225-3-25LF |
| Filter Cassette/Cyclone Holder includes: 3 feet of 1/4 inch ID Tygon tubing and a 25 mm adapter ring, for attaching a DPM or standard filter cassette to a worker's clothing in the breathing zone. May be used with or without a cyclone, required when using the GS-1 Cyclone with the DPM Cassette | Each | 225-1 |
| Replacement grit pots for use with GS1 and GS3 cyclones | 25 | P225012 |
| Standard-size Multi-purpose Calibration Jar | Each | 225-111 |
| 25 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones | Each | 225-01-01 |
| 37 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones. | Each | 225-01-02 |
| Calibration Chamber, for 25 and 37 mm cyclones | Each | 225-01-03 |
| Replacement Grit Pot for Aluminium Cyclones | 25 | P225011 |