亚欧黄色视频,91中文人妻在线,欧美.日韩.日本.国产电影

快速報價以下TEWS TECHNOLOGIES GmbH列表型號！若您的TEWS TECHNOLOGIES GmbH型號與以下型號類似，或者品牌一樣，我們都可以為您找到,，約1-2個工作日反饋報價,！

基于我們與TEWS TECHNOLOGIES GmbH廠家備件部門的長期通力合作，以更好的采購,、更精準的貨期、更專業的服務態度為您全天候服務,！
本公司是歐洲工控產品供應商,，直接源頭采購歐洲產地工業備件，歐洲工控產品*品質歐洲工控產品進口原裝歐洲工控產品精確貨期,。
上海薩帛機電設備有限公司,，價格優勢！

----------------------------------------------------------
- ：彭 -

- 手機:/ -

- :（直線） -

- -

- ：[email protected]或者 -

-----------------------------------------------------------
地址：上海浦東新區外高橋楊高北路536號樂非天地大廈6層
公司：www.sahbore,。,。ｃｏｍ
詢價請?zhí)峁ㄆ放?型號+數量+公司全稱/）或原產品的現場圖片信息。我們會盡快做出回復 ,。
優價銷售:

suco   0166-409-01-1-033 (set Pmax=20bar)   開關
suco   0166-40601-1-021 (set 2bar)   開關
suco   0166-409-01-1-033 (set Pmax=20bar)   開關
suco   0166-40601-1-021 (set 2bar)   開關
HIMA Paul Hildebrandt GmbH + Co KG   F 8621A H51q   ESD通信卡
Murr   7000-13321-0000000   接頭
VEM   B21F 315M4 VL TWS PIN FBW IL HW   電機
Dopag   401-09-01   計量閥
Dopag   401-09-01   閥
SIEMENS   7ML5431-4PA20-0RA2   計
hydac   EDS346-3-250-000   傳感器
hydac   HDA 3840-A-350-124 (10m)   開關
hydac   EDS 3446-3-0250-000   開關
SIEBERT   S102-04/14/0R-001/0B-K0   顯示模塊
SIEMENS   L46998-Z100-B1   光纖連接插頭

TEWS   TIP114-10R   接口模塊
TEWS   TIP114-10R   接口模塊
KUEBLER   8.5863.1200.G323.S013.K012   編碼器
SIEMENS   6DD1661-0AE1   模塊
SIEMENS   6DD1610-0AH4   模塊
SIEMENS   6DD1684-0FB0   模塊
SIEMENS   6DD1606-4AB0   模塊
SIEMENS   6DD1601-0AH0   模塊
SIEMENS   6DD1683-0BC5   模塊
SIEMENS   6DD1684-0AH0   模塊
SIEMENS   6DD1606-4AB0   模塊
SIEMENS   6DD1601-0AH0   模塊
SIEMENS   6DD1683-0BC5   模塊
SIEMENS   6DD1684-0AH0   模塊
SIEMENS   6DD1684-0FB0   模塊
Beck   90151111L4(set point 3bar)   測試單元

TEWS   TIP114-10R   接口模塊
TEWS   TIP114-10R   接口模塊
TEWS   TPMC917-10R   主板
TEWS   TIP114-10R   模塊
TEWS   TIP 114-10R   接口模塊
TEWS   TIP 114-10R   接口模塊
TEWS   TPMC917-10R   工業計算機用主板
TEWS   TIP 866-10R   主板
TEWS   TIP 114-10R   主板
TEWS   TVME200-10R   主板

TPMC632 Reconfigurable FPGA with 64 TTL I/O / 32 Diff. I/O

Standard single-width 32 bit PMC module conforming to IEEE P1386.1; PCI 2.1 compliant interface; 3.3V and 5V PCI Signaling Voltage; Board size: 149 mm x 74 mm; Xilinx XC6SLX45T-2 Spartan6 FPGA configured by serial Flash XCF16PFS or XC6SLX100T-2 configured by serial Flash XCF32PFS; Flash device is programmable via JTAG and in-system programmable; FPGA clock options: Local clock generator as source for the FPGA internal PLL; 1 DDR3 SDRAM bank, 64M x 16 (128 MB); 32 Mbit SPI-EEPROM for User Data or FPGA configuration ; I/O lines: 64 TTL I/O or 32 differential I/O or 32 TTL I/O and 16 differential I/O, TTL signaling voltage (maximum current: +/-32mA) or EIA-422/-485 signaling level or M-LVDS Standard (TIA/EIA-899), direction individually programmable; I/O access: 64 I/O lines on HD68 front connector, parallel to up to 64 I/O lines on rear connector P14; Operating temperature -40°C to +85°C

[MORE]

TPMC634 Reconfigurable FPGA with 64 TTL I/O / 32 Diff. I/O

Xilinx XC6SLX25 Spartan-6 user FPGA accessible on Local Address/DataBus; PCI to Local Bus Interface is handled by the PCI Target Chip; Programmable EEPROM for PCI Configuration Space Parameters; In-System-Programmable SPI Flash for User FPGA Configuration; User FPGA directly In-System-Programmable by Software; Baud Rate Oscillator available at User FPGA Pin; I/O options: 64 TTL I/O (-10R), 32 differential I/O RS422/485 (-11R), 32 TTL I/O and 16 diff. I/O RS422/485 (-12R), 32 differential I/O M-LVDS (-13R), 32 TTL I/O and 16 diff. I/O M-LVDS (-14R); I/O lines accessible on both HD68 Front Connector and P14 Rear Connector; Operating temperature: -40°C to +85°C

[MORE]

TAMC100 1 Slot IndustryPack Carrier for AMC

Single Mid-Size or Full-Size AMC carrier for 1 IndustryPack module; AMC module with AMC.1 type 1 interface; IPMI interface; 8/32MHz IP interface, no DMA; Routing of all IP interrupts on PCIe INTA/MSI, local interrupt status register; Self healing fuses and RF-filtering for the power supply of the IndustryPack slot; HD50 SCSI-2 type connectors in EMI front panel; Status LEDs in front panel; Operating temperature -40°C to +85°C

[MORE]

TAMC200 3 Slot IndustryPack Carrier for AMC

Double Mid-Size or Full-Size AMC.1 compliant carrier for 3 IndustryPack modules; IPMI V1.5 Support; 8/32MHz IP interface, no DMA; Routing of all IP interrupts on PCIe INTA/MSI, local interrupt status register; Self healing fuses and RF-filtering for the power supply of the IndustryPack slots; VHDCI-68 connectors and Status LEDs in front panel; Operating temperature -40°C to +85°C

[MORE]

TAMC220 3 Slot IndustryPack Carrier for MTCA.4 Rear I/O

Double Mid-Size or Full-Size AMC.1 and MTCA.4 compliant carrier for 3 IndustryPack modules; IPMI V1.5 Support; 8/32MHz IP interface, no DMA; Routing of all IP interrupts on PCIe INTA/MSI, local interrupt status register; Self healing fuses and RF-filtering for the power supply of the IndustryPack slots; Rear I/O; Status LEDs in front panel; Operating temperature -40°C to +85°C

[MORE]

TPCI100 2 Slot IndustryPack Carrier

Standard PCI carrier for 2 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on two 50 pin 0.1 inch ribbon cable connectors; 8/32 MHz IP interface; No DMA; On board status LED; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TPCI200 4 Slot IndustryPack Carrier

Standard PCI carrier for 4 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on four 50 pin 0.1 inch ribbon cable connectors; 8/32 MHz IP interface; No DMA; On board status LED; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

TCP201 4 Slot IndustryPack CompactPCI Carrier (EMI protection)

6U/4TE CompactPCI carrier for 4 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on four HD50 SCSI-2 type connectors in EMI front panel; 8/32 MHz IP interface; No DMA; Status LED in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TCP211 2 Slot IndustryPack CompactPCI Carrier

3U/4TE CompactPCI carrier for 2 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on two 50 pin ribbon cable connectors (stacked version) in front panel; 8/32 MHz IP interface; No DMA; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TCP213 2 Slot IndustryPack CompactPCI Carrier (Back I/O)

3U/4TE CompactPCI carrier for 2 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on CompactPCI connector J2; 8/32 MHz IP interface; No DMA; Status LED in front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TCP220 4 Slot IndustryPack CompactPCI Carrier (Back I/O)

6U/4TE CompactPCI carrier for 4 IndustryPack; Self healing fuses and RF-filters on power lines of each IndustryPack slot; IP I/O on CompactPCI connector J4 and J5; 8/32 MHz IP interface; No DMA; Status LED in EMI front panel; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TPCI100 2 Slot IndustryPack Carrier

[MORE]

TPCI200 4 Slot IndustryPack Carrier

[MORE]

TVME200 4 Slot Industry Pack VMEbus Carrier

6U/4TE VMEbus carrier for 4 IndustryPack; A16/A24/A32, D08/16; 16 position rotary switches for configuration; Interrupt routing by software or by rotary switch for predefined sets; Self healing fuses and RF-filters on power lines of each IndustryPack slot; Four 50 pin 0.1 inch ribbon cable connectors (stacked version) in front panel, rear I/O of 'IP C' and 'IP D'(TVME200-20 only); 8 MHz IP interface including memory; No DMA; Status LED in front panel; Operating temperature -40°C to +85°C

[MORE]

TVME201 4 Slot Industry Pack VMEbus Carrier (EMI front panel)

6U/4TE VMEbus carrier for 4 IndustryPack; A16/A24/A32, D08/16; 16 position rotary switches for configuration; Interrupt routing by software or by rotary switch for predefined sets; Self healing fuses and RF-filters on power lines of each IndustryPack slot; Four HD50 SCSI-2 type connectors in EMI front panel; 8 MHz IP interface including memory; No DMA; Status LED in front panel; Operating temperature -40°C to +85°C

[MORE]

TVME202 4 Slot Industry Pack VMEbus Carrier

6U/4TE VMEbus carrier for 4 IndustryPack; A16/A24/A32, D08/16; 16 position rotary switches for configuration; Interrupt routing by software or by rotary switch for predefined sets; Self healing fuses and RF-filters on power lines of each IndustryPack slot; Four 50 pin 0.1 inch ribbon cable connectors (180° version); 8 MHz IP interface including memory; No DMA; Status LED in front panel; Operating temperature -40°C to +85°C

[MORE]

TVME210 2 Slot Industry Pack VMEbus Carrier

3U/4TE VMEbus carrier for 2 IndustryPack; A16/A24, D08/16; 16 position rotary switches for configuration; Interrupt routing by software or by rotary switch for predefined sets; Self healing fuses and RF-filters on power lines of each IndustryPack slot; Two 50 pin 0.1 inch ribbon cable connectors in front panel; 8 MHz IP interface including memory; No DMA; Status LED in front panel; Operating temperature -40°C to +85°C

[MORE]

TVME211 2 Slot Industry Pack VMEbus Carrier

3U/4TE VMEbus carrier for 2 IndustryPack; A16/A24, D08/16; 16 position rotary switches for configuration; Interrupt routing by software or by rotary switch for predefined sets; Self healing fuses and RF-filters on power lines of each IndustryPack slot; Two 50 pin 0.1 inch ribbon cable connectors (stacked version) in front panel; 8 MHz IP interface including memory; No DMA; No Status LED; Operating temperature -40°C to +85°C

[MORE]

TVME220 4 Slot IndustryPack Carrier for VME64x

6U/4TE VME64x carrier for 4 IndustryPack; A16/A24/A32, D08/16; 16 position rotary switches for configuration; Interrupt routing by software or by rotary switch for predefined sets; Self healing fuses and RF-filters on power lines of each IndustryPack slot; All of the 200 I/O lines from the 4 IP slots are available at the VME64x connectors P0 and P2. The I/O mapping is compliant to the ANSI/VITA 4.1-1996 standard; 8 MHz IP interface including memory; No DMA; Status LED in front panel; Operating temperature -40°C to +85°C

[MORE]

TVME230 4 Slot IndustryPack Expansion Card for VMEbus CPU's

PCI Expansion Card for VMEbus CPU's with a PCI Expansion Connector like the TVME8240A, TVME8300, TVME 8400, MVME5500, MVME5100, MVME3100, MVME2300 or MVME2400; 6U carrier for 4 IndustryPack; PCI2.2 compliant interface, 33MHz, 32bit, 5V and 3.3V PCI signaling voltage; ANSI/VITA 4-1995 compliant interface to IP modules; IP power: +5V, +/-12V taken from the VMEbus backplane; 8Mbyte memory space per IP; 8/32MHz interface, no DMA; Routing of all IP interrupts to PCI INTA, local interrupt status register; Self healing fuses and RF-filters on all IP power lines; I/O access via HD50 SCSI-2 type connector per IP, front panel I/O; Status LEDs; Operating temperature -40°C to +85°C

[MORE]

TIP001-TM Universal Transition Module for IP Modules

Transition Module providing all 50 IP I/O lines on a plugable screw terminal at the 6U front panel; Cable TA106-10 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]

TIP866-IO DIN Rail Mounting I/O Module (8 x DB9) for TIP866/867

DIN Rail Mounting I/O module, 95 mm x 83 mm; 8 DB9 male connectors; Terminal point for shield of all 8 DB9 connectors; Supports all versions of the TIP866, TIP867 and IP-Octal; Cable TA106-10 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]

TIP866-TM-10 Transition Module (8 x DB25) for TIP866/867

6U / 8TE EMV front panel; 8 DB25 female connectors mounted in front panel; Supports all versions of the TIP866, TIP867 and IP-Octal; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 9 of the DB25 connectors of channel 1 to 8; Fuse protected by a 1A multi-fuse; Cable TA106 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]

TIP866-TM-20 Transition Module (8 x RJ45) for TIP866/867

6U / 4TE EMV front panel; 8 shielded RJ45 connectors mounted in front panel; Supports all versions of the TIP866, TIP867 and IP-Octal; DTE and DCE configuration by jumper fields; RS422 and RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 1 of RJ45 connectors of channel 3 to 8; Fuse protected by a 1A multi-fuse; Cable TA106 (0.8m ribbon cable with 50 pin ribbon cable connectors) is included

[MORE]

TIP866-TM-30 Transition Module (16 X RJH) for TIP866/867

6U / 4TE EMV front panel; Sixteen 4pin RJH connectors mounted in front panel; Supports TIP866-10x/11x, TIP867 and IP Octal; RS485 termination selectable by jumper; +5V / GND by 2 pin terminal block; Power only required to supply on board termination ; Fuse protected by a 1A multi-fuse; Two TA106 (0.8m ribbon cables with 50 pin ribbon cable connectors) are included

[MORE]

TIP255 2 Mbytes SRAM Memory with Battery Backup

Data Sheet (PDF)

User Manual (PDF)
TIP255

The TIP255 is an IndustryPack compatible module that offers an easy and reliable way to implement 2 Mbytes of SRAM memory with battery backup. The TIP255 is ideal for holding configuration parameter and data logging applications.

Four 512 Kbit x eight low power SRAM devices are used to provide two banks of 1 Mbyte (16 bit wide) SRAM memory.

A non-volatile controller together with the on board lithium battery converts the SRAM into non-volatile memory. The battery status can be monitored by the control and status register. Additionally an interrupt can be generated on battery low.

Accesses to the TIP255 SRAM memory occur within the IP memory space. The IP I/O space hold

TIP255 2 Mbytes SRAM Memory with Battery Backup

2 Mbytes of SRAM Memory organized in 2 banks of 1 Mbyte (16 bit wide); Nonvolatile controller converts SRAM into non-volatile memory; On board battery holder with lithium battery (type CR2430, 285mAh); Automatically switches to battery backup supply when Vcc supply drops; Interrupt support on battery low; Battery life time 8 years typical @ +25°C; Operating temperature -40°C to +85°C (TIP255-10x-ET)

TIP810 CAN Bus Controller

CAN bus controller Philips SJA1000, Physical interface optically isolated; CAN High Speed (ISO11898) or modified RS485; Operating temperature -40°C to +85°C

[MORE]

TIP815 ARCNET Controller

COM20020 ARCNET controller; Network speed up to 5Mbps; Traditional hybrid interface or isolated RS485 interface on IP; Operating temperature 0°C to +70°C

[MORE]

TIP816 Extended CAN Bus IP

CAN bus controller supports standard as well as extended frames according to CAN specification 2.0 part A and B; Physical interface optically isolated; CAN High Speed (ISO11898) or modified RS485; Operating Temperature -40°C to +85°C

[MORE]

TIP903 Three Channel Extended CAN Bus

Three CAN bus controller supporting standard as well as extended frames according to CAN specification 2.0 part A and B; Physical interface: CAN High Speed (ISO11898); Operating temperature -40°C to +85°C

[MORE]

TIP102 One/Two Axes Incremental Encoder Motion Control IP

High precision motion controller, 24 bit counter (1.2MHz), 16 bit D/A converter, 12 bit A/D converter, 4 inputs, 3 outputs; Requires transition module TIP102-TM-xx; Operating temperature -40° to +85° (Transition Module 0°C to +70°C)

[MORE]

TIP111 One/Two Axes Absolute (SSI) Motion Encoder Control IP

High precision motion controller; 32 bit synchronous serial encoder interface (SSI); 16 bit D/A converter, 12 bit A/D converter, 4 inputs , 3 outputs; Requires transition module TIP111-TM-xx; Operating temperature 0°C to +70°C

[MORE]

TIP114 10 Channel Absolute Encoder (SSI) Interface

10 independent absolute encoder (SSI) interfaces, programmable clock rate from 1μs to 15μs and data bits from 1 bit to 32 bit; Binary or Gray Code; Even, odd or no parity; Data inputs galvanically isolated; Operating temperature -40°C to +85°C

[MORE]

TIP115 5 Channel Absolute Encoder (SSI) Interface with 'Listen Only' Mode

5 channel synchronous serial interface (SSI) with two modes: Standard SSI Interface Controller / 'Listen Only' mode; Programmable clock rate from 1μs to 15μs and data bits from 1 bit to 32 bit; Binary or Cray Code; Even, odd or no parity; EIA-422 encoder inputs galvanically isolated by high speed optocouplers; Operating temperature -40°C to +85°C

[MORE]

TIP116 4 Channel Quadrature / General Purpose Counter

4 channel Quadrature / General Purpose Counter; Each 32bit counter with 32bit preload register, 32bit comparator register, 32bit latched output register, Up/down, direction or quadrature count, Divide-by-N or Single Cycle counting mode and programmable control input with 4 additional control modes; Vectored interrupt; DC to 4MHz count frequency; Inputs TTL/RS422 compatible; 1 general purpose RS422 I/O; Interval timer; Operating temperature -40°C to +85°C

[MORE]

TIP119 6 Channel 16 bit Quadrature Decoder Counter

6 Channel 16 bit quadrature counter; Vectored interrupt; Inputs RS422/RS423 compatible; 1.3 MHz maximum tracking rate; 220 ohm input impedance; Operating temperature 0°C to +70°C

[MORE]

TIP150 One/Two Channel Synchro /Resolver Interface

One/Two channel tracking Synchro/Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit; Converter accuracy 4 arcmin +1LSB; Bandwidth adjustable; Analog velocity output, built-in-test-output; Operating temperature 0°C to +70°C

[MORE]

TIP500 16 Channel of Isolated 12 bit A/D Conversion

16 single-ended or 8 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10μs without channel / gain change and up to 12.5μs with channel / gain change; +/-10V inputs or 0-10V; Programmable gain of 1, 2, 5, 10 or 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; Operating temperature -40°C to +85°C

[MORE]

TIP501 16 Channel of Isolated 16 bit A/D Conversion

16 single-ended or 8 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12μs without channel / gain change and up to 14.5μs with channel / gain change; +/-10V inputs or 0-10V; Programmable gain of 1, 2, 5, 10 or 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; Operating temperature -40°C to +85°C

[MORE]

TIP550 8 (4) Channel of Isolated 12 bit D/A Conversion

8 (4) channels of isolated 12 bit D/A conversion; Settling time to 0.01% typical 13μs; +/-10V or 0-10V output; Factory calibrated gain and offset; DC/DC converter on board; Operating temperature -40°C to +85°C

[MORE]

TIP551 4 Channel of Isolated 16 bit D/A Conversion

4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typical 10μs; +/-10V or 0-10V output; Factory calibrated gain and offset, DC/DC converter on board; Operating temperature -40°C to +85°C

[MORE]

TIP570 16 Channel multiplexed isolated 12 bit ADC / 8 Channel isolated 12 bit DAC

16 single-ended or 8 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10μs without channel / gain change and up to 12.5μs with channel / gain change; +/-10V inputs; Programmable gain of 1, 2, 5, 10 or 1, 2, 4, 8; 8 channels of isolated 12 bit D/A conversion; Settling time to 0.01% is 5μs typical; +/-10V outputs factory calibrated gain and offset; DC/DC converter on board; Operating temperature -40°C to +85°C

[MORE]

TIP830 8 Channel 12 (16) bit Simultaneous Sampling A/D

8 single-ended channels of 12 (16) bit A/D conversion, simultaneous sampling and converting; +/- 10V inputs; Up to 40K samples per second; Factory calibrated gain and offset; External trigger-I/O-pin; Operating temperature -40°C to +85°C

[MORE]

TIP845 48 Channel of 14 bit A/D Conversion

48 single-ended or 24 differential channels of 14 bit A/D conversion; 70Vpp overvoltage protection; programmable gain amplifier with gain 1, 2, 4 or 8; 14 bit A/D converter with internal S/H and reference; On board sequencer; Vectored interrupts; Factory calibrated, calibration information stored in ID PROM unique to each IP; Operating temperature -40°C to +85°C

[MORE]

Product Overview

TEWS TECHNOLOGIES GmbH has developed a large number of standard I/O solutions that are used worldwide in applications such as industrial control, medical equipment, traffic control, ecommunication, COTS and others.

We proudly present a growing product range of IndustryPack, PMC, XMC, PCI, PCIe, cPCI, PC104+, VME, FMC and AMC modules for digital and analog I/O, motion control, serial communications, networking, field bus, and user programmable FPGA solutions. TEWS believes in a total solution philosophy. As a result, we offer driver software for most of our modules for operating systems like VxWorks, Windows, Linux, LynxOS, Integrity, and QNX6.

As part of our continued commitment to the mezzanine market, more modules are in the planning phase and will be introduced to the market in the near future. New product information will be updated in our press news.

Download of TEWS brochure "Product Overview" including all TEWS products with a brief technical description and download of all Product Data Sheets arranged according to product standards:

TIP630 Reconfigurable FPGA with 48 TTL I/O

Data Sheet (PDF)

User Manual (PDF)
TIP630

The TIP630 is an IndustryPack compatible module providing a user configurable FPGA with 200,000 system gates. 48 I/O lines of the FPGA are directly connected to the IP I/O connector. Each I/O line has a series damping resistor and is protected against ESD and overvoltage. Six pull up resistor networks mounted in sockets are provided for the I/O lines. Pull up voltage is selectable to be either +3.3V or +5V. The I/O lines are individually programmable as input, output or tri-state I/O.

All IP bus signals of the IP interface are routed to the FPGA allowing to implement 8 MHz or 32 MHz bus interfaces with or without DMA.

Several clock sources are available at the FPGA: the IP clock (8 MHz or 32 MHz), a local 32 MHz clock and two outputs of the programmable clock generator (250 KHz 166 MHz).

The FPGA can be configured via the IP bus or optional by a PROM which can be mounted in a socket. The configuration download for the FPGA and the programming of the clock generator is implemented by a CPLD reserving the upper two 16 bit registers of the IP I/O space. After the FPGA has been configured with the user application it can be accessed via the IP bus. The CPLD can be used for reprogramming the FPGA without turning power off. Furthermore the CPLD offers a default ID-Prom contents which can stay active after configuring the FPGA or it can be switched off and replaced by a user ID-PROM implemented in the FPGA.

User applications can be developed using the design software ISE WebPACK which can be downloaded free of charge fromwww.xilinx,。。ｃｏｍ .

For First Time Users the Engineering Documentation TIP630-ED is recommended. The Engineering Documentation includes TIP630-DOC, schematics, data sheets / application notes of the components and well documented sample VHDL source code.

Software support (TIP630-SW-xx) is available for different operating systems.

TIP630 Reconfigurable FPGA with 48 TTL I/O

User configurable FPGA with 200,000 system gates; 48 digital I/O lines individually programmable as input, output, tri-state I/O; 6 pull up resistor networks (selectable pull up voltage +3.3V or 5V), ESD and overvoltage protection for each I/O line; Xilinx XC2S200-5 SpartanII FPGA logic configurable via IP bus or optional by PROM XC17S200APD8I; FPGA clock options: IP bus clock (8 or 32 MHz) / Local 32 MHz clock oscillator / PLL programmable clock generator CY22150 (250 KHz -166 MHz), 2 clock outputs connected to FPGA; Operating temperature -40°C to +85°C

[MORE]

TIP600 16 Interrupt Generating Digital Inputs 24V

16 digital inputs, 24V DC, optically isolated; Fully programmable interrupt capabilities; Electronic debounce; Operating temperature 0°C to +70°C

[MORE]

TIP605 16 Interrupt Generating Digital Inputs 24V

16 digital inputs, 24V DC, optically isolated; Fully programmable interrupt capabilities; Electronic debounce; Operating temperature -40 °C to +85 °C

[MORE]

TIP606 16 Isolated Digital Inputs for Avionic Applications

16 digital inputs designed for avionic applications; Input voltage 28V typical, 44V maximum, optically isolated; Differential high impedance input (112kohms typical); Input threshold for High Level >14V typical; Input threshold for Low Level <3.5V typical; Fully programmable interrupt capabilities; Electronic debounce; Operating temperature -40°C to +85°C

[MORE]

TIP610 16/20 Channel TTL I/O

16/20 TTL I/O's based on Zilog Z8536 controller arranged as two 8 bit I/O ports plus a 4 bit control port; Operating temperature 0°C to +70°C

[MORE]

TIP620 Digital 48, Dual PI/T

Emulation of two Motorola MC68230 Programmable Interface/Timer with up to 48 digital I/O lines; Two Module versions with specific user configuration options; TTL compatible; Termination: 10kohms pull-ups to 3.3V; Output current max. +/- 2mA; ESD and overvoltage protection for each I/O line; Operating temperature -40°C to +85°C

[MORE]

TIP670 8 (4) Digital Inputs, 8 (4) Digital Outputs 24V

8 (4) digital inputs, 24V DC, optically isolated, fully programmable interrupt capabilities, electronic debounce; 8 digital outputs, 24V DC 0.5A, optically isolated; Channels are isolated against each other in groups of two; Each channel can be configured as high side switch or as low side switch; Overload and short circuit protection; Operating temperature 0°C to +70°C

[MORE]

TIP672 24 differential I/O lines with interrupts

24 digital differential I/O lines using EIA-422 / EIA-485 compatible ESD protected line driver and receiver; All 24 input lines can generate an interrupt; Signal edge handling is programmable; Simultaneous update internally and across several IP's by an external TTL clock source; On board line termination; Operating Temperature -40°C to +85°C

[MORE]

TIP675 48 TTL I/O Lines with Interrupts

48 digital TTL tri-state I/O lines with pull up resistors; I/O lines individually programmable as input or output; Full interrupt capability on inputs; Electronic debounce circuit on input; ESD and overvoltage protection; Programmable simultaneous update feature by external clock source (TTL level); Operating temperature -40°C to +85°C

[MORE]

TIP700 16 (8) Digital Outputs

16 (8) digital outputs, 24V DC 0.5A, optically isolated; Channels are isolated against each other in groups of two; Each channel can be configured as high side switch or as low side switch; Overload and short circuit protection; Operating temperature -25°C to +85°C

[MORE]

TIP710 16 Digital Outputs

16 digital outputs, high side switches , Output signal voltage 6V to 48V DC common to all outputs, 1.0 A continuous per channel, optically isolated; Channels are isolated against each other in sets of two; full protected; Operating temperature -40°C to +85°C

[MORE]

TIP865 4 Channel Serial Interface RS232/TTL/RS422

4 channels of high performance multi-mode serial RS232 / TTL / RS422 / RS485 interface; Programmable baud rates up to 2MBit/s, asynchronous or synchronous protocols; Vectored interrupt; Support of full modem controls; Operating temperature 0°C to +70°C

[MORE]

TIP866 8 Channel Serial Interface RS232/TTL/RS422

8 channels of high performance RS232/TTL/RS422 asynchronous serial interfaces; Programmable baud rates up to 115.2kbaud / 460kbaud; Vectored interrupt; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232/RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating temperature 0°C to +70°C (TIP866-xx) and -40°C to +85°C (TIP866-xx-ET)

[MORE]

TIP867 8 Channel Serial Interface RS485

8 channels of high performance RS485 serial interface; Programmable baud rates up to 2Mbps; Vectored interrupt; Support of Dx+/-, and GND or Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating temperature 0°C to +70°C

[MORE]

TPMC600 32 (16) Interrupt generating Digital Inputs 24V

32 (16) digital inputs, 24V DC, optically isolated; Fully programmable interrupt capabilities; Electronic debounce; HD50 SCSI-2 type connector in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to + 85°C

[MORE]

TPMC670 16 (8) Digital Inputs 24V, 16 (8) Digital Outputs 24V 0.5A

16 (8) digital inputs, 24V DC, optically isolated, fully programmable interrupt capabilities, electronic debounce; 16 (8) digital outputs, 24V DC 0.5 A, optically isolated; High side switch; Overload and short circuit protection; HD50 SCSI-2 type connector in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C

[MORE]

TPMC671 16 Digital Inputs 24V, 16 Digital Outputs 24V 0.5A

16 digital inputs, 24V DC, optically isolated, fully programmable interrupt capabilities, electronic debounce; 16 digital outputs, 24V DC 0.5 A, optically isolated; High side and low side switch (build option); Overload and short circuit protection; HD68 SCSI-3 type connector in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C

[MORE]

TPMC680 64 Digital Inputs/Outputs, 8x 8-bit Port

64 bit TTL I/O; 8 x 8 bit ports; HD68 connector in front panel, 7 of these 8 bit ports available at P14; basic operating modes: byte I/O, 2x16 bit port with handshake, 1x 32 bit port with handshake; Interrupt capability; PCI I/O signaling voltage 3.3V and 5V; Operating Temperature -40°C to +85°C

[MORE]

TPMC681 64 bit TTL I/O (Bit I/O)

64 bit TTL I/O; All lines individually programmable as input, output or tri-state; HD68 connector in front panel and P14 I/O, Interrupt capability (rising, falling, both edges) for each I/O line; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TPMC682 Three 16 bit I/O Ports with 512 Word FIFO and Handshake

Three 16 bit I/O ports with 512 word FIFO per port and handshake; individually programmable FIFO thresholds; HD68 connector in front panel and P14 I/O, Interrupt capability; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TPMC683 32 RS422/RS485 Differential I/O

Interrupt generating 32 differential I/O lines; EIA-422/-485 signaling level, Direction individually programmable per line, 120 ohm termination resistor, 15kV ESD protection; HD68 connector in front panel and P14 I/O, Interrupt capability (rising, falling, both edges) for each I/O line; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C

[MORE]

TPMC685 16 x 8 Bit Digital Inputs/Outputs (5V TTL)

128 bit TTL I/O; 16 x 8 bit ports; HD68 connector in front panel, 8 of these ports available at P14; Interrupt capability; ESD-Protection; PCI I/O signaling voltage 3.3V and 5V; Operating Temperature -40°C to +85°C

[MORE]

TPMC700 32 (16) Digital Outputs 24V 0.5A

32 (16) digital outputs, 24V DC 0.5A, optically isolated; High side; Overload and short circuit protection; HD50 SCSI-2 type connector in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -25°C to +85°C

[MORE]