您好, 歡迎來到化工儀器網
產品分類品牌分類
-
氣體檢測管 氣體檢漏儀 復合氣體檢測儀 *檢測儀 其他氣體檢測儀 VOC檢測儀 光離子化檢測儀 煙氣分析儀 SF6檢漏儀 便攜式氣體檢測儀 二氧化氮檢測儀 環境氣體*儀器 可燃?xì)庑孤稒z測儀 一氧化氮檢測儀 二氧化硫檢測儀 二氧化碳檢測儀 一氧化碳檢測儀 四氣體檢測儀 硫化氫檢測儀 酒精檢測儀 氯氣檢測儀 可燃?xì)怏w檢測儀 環氧乙烷檢測儀 硫酰氟氣檢測儀 臭氧檢測儀 氨氣檢測儀 甲醛檢測儀 多氣體檢測儀 單一氣體檢測儀 氣體分析儀
-
環境氣溶膠測量?jī)x 無線電干擾測試儀 工頻磁場監測儀 工頻電場監測儀 射頻輻射監測儀 X、γ巡測儀 便攜式中子劑量?jī)x 腕式個人劑量?jī)x x.γ劑量率儀 電離室巡測儀 微波漏能儀 α,、β表面污染測量?jī)x 臺式頻譜儀 手持式頻譜儀 氡檢測儀 便攜式輻射測量?jī)x γ能譜儀 個人劑量計 電磁場強度測試儀 Atomtex 輻射檢測儀
產品簡介
詳細介紹
REX GAUGE 雷克斯2100輪胎硬度計
Description:
Tire hardness can be a critical factor in setting up a race car. A tire that's too hard may sacrifice traction, while a tire that's too soft may give great traction but wear too quickly, and an unmatched set of tires may result in an ill handling car. To properly set up a car, a measure of tire hardness is necessary, and the easiest and most cost-effective way to obtain such a measure is to use a durometer.
The Type A durometer as specified by ASTM D-2240 is the gauge used by tire manufacturers to measure hardness of tire rubber. The gauge gives readings of hardness in durometer points on a scale of 0-100, with 100 being the hardest reading. Some race tires come from the factory with the durometer hardness noted on the side wall, but factors such as ambient temperature, track temperature, usage, and age of the tire can change the actual hardness of the tire from the factory hardness.
Rex Gauge Company's 2100 Tire Durometer allows racers to quickly and accuray make checks of tire hardness. Unlike other "racing durometers" （which are just relative hardness gauges）, the Rex 2100 is calibrated to the ASTM D-2240 standard for durometer hardness and is traceable to N.I.S.T. Thus, the Rex 2100 allows comparison with the factory tire specifications.
The 2100 is a handheld gauge weighing only 4.2 oz. The indicator case, bezel, and barrel are all billet machined aluminum. Because of its billet construciton, and the fact that the durometer is manufactured in the USA by Rex Gauge Company （an industry leader in durometers for over 60 years）, the craftsmanship that goes into the 2100 is unsurpassed. The gauge is furnished with a carrying case and a one year warranty.
如果您對本品感興趣請與我公司
北京東方安諾生化科技有限公司
： -8009 郭
： www.annovatech.com
：
