您好, 歡迎來到化工儀器網
G1367-87017Low Carry Over Seat 0.17
G1367-87101Seat assy for G1367 well plate sampler
G1367-87102Seat assy, 0.12mm id for G1367
G1367-87104Seat assy for G1367 Well Plate Sampler
產品分類品牌分類
-
臺式大容量冷凍離心機 臺式低速自動平衡離心機轉子 臺式高速冷凍離心機 臺式高速冷凍離心機轉子 高速冷凍離心機轉子 冷凍離心機轉子 低速離心機角轉子 自動脫蓋離心機 自動脫帽離心機 檢測離心機 血型卡專用離心機 自動平衡離心機 乳脂離心機 臺式高速離心機 高速冷凍離心機 落地式離心機 臺式離心機 高效離心機 離心機轉頭指南 高速大容量離心機 微型離心機 真空離心機 微波萃取儀 濃縮儀 固相萃取儀 旋轉離心機 高速離心機 血液離心機 迷你離心機 低速離心機 超速分離系統 冷凍離心機 離心機 真空離心濃縮儀 干燥箱/培養箱 秒表/計時器 旋轉蒸發儀 水循環真空泵 分析天平 PH計 周邊設備
產品簡介
詳細介紹
安捷倫AA樣品杯
| G1367-87201 | Needle assy, standard well plate sampler |
| G1367-87202 | Needle Assy for G1367D |
| G1367-87300 | Loop capillary assy well plate sampler |
| G1367-87302 | Seat capillary 0.17x 100mm, 0.8 mm od |
| G1367-87303 | Seat capillary 0.12 x 100 mm, 0.8 mm od |
| G1367-87304 | SST Capillary 250x 0.17mm,m/m,ps/ps |
| G1373-87300 | SST Capillary,250x0.12mm, 1 fitting |
| G1375-87300 | Seat Capillary, 50um, 150mm |
| G1375-87301 | Fused silica/EK capillary 50um, 22cm |
| G1375-87302 | Fused silica/EK capillary 50um, 20cm |
| G1375-87303 | Fused silica/EK capillary 100um, 110cm |
| G1375-87304 | Fused silica/EK capillary 50um, 50cm |
| G1375-87305 | Fused silica/EK capillary 100um, 22cm |
| G1375-87306 | Fused silica/EK capillary 100um, 55cm |
| G1375-87308 | Fused silica/EK capillary 75um, 40cm |
| G1375-87309 | Fused silica/EK capillary 50um, 28cm |
| G1375-87310 | Fused silica/EK capillary 50u, 55cm |
| G1375-87311 | Fused silica/EK capillary 75um, 50cm |
| G1375-87312 | Fused silica/EK capillary 100um, 20cm |
| G1375-87313 | Fused silica/EK capillary 50um, 70cm |
| G1375-87314 | OQ/PV capillary for u-LC system |
| G1375-87315 | Loop capillary, 8 ul for G1377A |
| G1375-87316 | Seat Capillary, 75um, 150mm |
| G1375-87317 | Seat Capillary, 100 um, 150 mm |
| G1375-87318 | Fused silica/EK capillary, 125um 55cm |
| G1375-87320 | Fused silica/ek capillary, 25um 10cm |
| G1375-87321 | Fused Silica/EK capillary 25u, 22cm |
| G1375-87322 | Fused Silica/EK capillary 25u, 35cm |
| G1375-87323 | Fused silica/EK capillary, 25um 55cm |
| G1375-87324 | Fused silica/EK capillary, 25um 70cm |
| G1375-87325 | Fused silica/EK capillary, 50um 10cm |
| G1375-87326 | Waste tube, FEP, 1.6mm od, 08mmid |
| G1375-87327 | Fused silica/EK capillary, 75um 65cm |
| G1375-87328 | Fused Silica/EK Capillary, 125um, 220m |
| G1375-87329 | Fused Silica/EK Capillary, 125um, 80m |
| G1375-87400 | SST capillary 280x0.17mm, 1/16in fitting |
| G1376-60003 | BOttle head assembly for u-LC system |
| G1376-60005 | Seal wash kit for 1260 cap/nano pump |
| G1376-60015 | Support ring for cap/nano/SFC pump |
| G1376-60016 | Seal holder for cap/nano/SFC pump |
| G1376-68707 | Extended flow range kit (100 ul/min) |
| G1376-68710 | PM kit for G1376A Capillary Pump |
| G1377-44900 | tool for Micro Seat Capillary Mounting |
| G1377-60002 | Seal support assy |
| G1377-60012 | Seal support back up assy for G1367D |
| G1377-60023 | Micro analytical head for G1367D |
| G1377-87000 | Seat Assy Micro WPS (100um ID cap.) |
| G1377-87001 | Seat Assy Micro WPS (75um ID cap.) |
| G1377-87002 | Seat Assy Micro WPS (50 um ID cap.) |
| G1377-87101 | Seat assy for G1377 u-well plate sampler |
| G1377-87201 | Needle assy G1377A u-well plate sampler |
| G1377-87300 | Loop capillary, 40ul for G1377A |
| G1377-87301 | SST capillary, 0.25mm id, 13cm long |
| G1377-87310 | Loop capillary 40uL for G1367D |
| G1379-67310 | u-Vacuum degasser tubing kit |
| G1512-60530 | Y-Cable, G1512A, 5890A, APG Remote |
| G1530-60560 | Signal cable, general purpose, 6 pins |
| G1530-60570 | Cable Assembly, 6890A to 3396 |
| G1530-60590 | Cable, 6890, ext. events |
| G1530-60600 | Cable, RS232, 9F/9F |
| G1530-60610 | Cable, GC to PC, 9F/25M |
| G1530-60930 | Cable, Remote, 6890, 9M/9M |
| G1530-80650 | Exhaust deflector assy |
| G1531-20690 | Collector body (6890 FID) |
| G1531-20700 | Collector Insulator (6890 FID) |
| G1531-21090 | Hasloy Collector Body |
| G1531-60680 | Igniter Cable Assembly |
| G1531-60690 | 6890 FID collector assembly |
| G1531-80560 | Jet, Capillary Optimized,0.29mm ID |
| G1531-80620 | Jet,Cap Optimized, high temp,0.47mm ID |
| G1532-20710 | 6890 TCD Packed Column Adapter |
| G1532-60675 | TCD Replacement Cell 6890 |
| G1532-60685 | TCD Cell 6890 |
| G1532-80540 | Adapter Weldment |
| G1533-80565 | 6890 ECD Make-up gas adapter |
| G1534-20530 | NPD Collector Funnel |
| G1534-40020 | Insulator, NPD Upr |
| G1534-40030 | Insulator, NPD Lower |
| G1534-60570 | NPD bead assembly |
| G1534-80580 | NPD jet,Capillary with extended tip |
| G1534-80590 | NPD jet, Adaptable cap with extended tip |
| G1540-85010 | Oral Fluids Analyzer Test Sample |
| G1544-20590 | Retaining nut |
| G1544-60575 | Split/Splitless Insert 6890 EPC |
| G1544-60585 | S/SL Insert Weldment, uses large filter |
| G1544-80530 | 6890 Splitvent replacement cartridge 2pk |
| G1544-80550 | Split trap assembly (6890) |
| G1544-80580 | S/SL Insert Weldment, for use with ECD |
| G1545-80520 | blPCOC 530 Septum Nut |
| G1580-60060 | CPM-1/16x0.10inID Tube Assy, 50cm, Inert |
| G1580-60062 | CPM-1/16x0.20inID Tube Assy, 50cm, Inert |
| G1580-60575 | 6890 Insert Weldment, for valved systems |
| G1580-60585 | Insert Weldment, valved system w/filter |
| G1580-61060 | Micro Fluidics 1/16in x 0.010 Union Kit |
| G1580-80060 | CPM-1/16in x 0.10in ID Tube Assy, 50cm |
| G1580-80062 | CPM-1/16in x 0.20in ID Tube Assy, 50cm |
| G1600-60002 | Capillary cassette |
| G1600-60007 | Electrode assembly |
| G1600-60013 | Capillary cassette for CE/MS |
| G1600-60027 | HP 3D CE High Sensitivity cell-replace |
| G1600-60150 | Alignment interface 25um |
| G1600-60210 | Alignment interface for std cap 50um id |
| G1600-60230 | Alignment intrfc light path cap 50um id |
| G1600-60310 | Alignment interface for std cap 75um id |
| G1600-60330 | Alignment intrfc light path cap 75um id |
| G1600-62402 | Plastic Screw for CE 10/pk |
| G1600-63200 | CE Cell Fitting Kit |
| G1600-67201 | Pre-puncher |
| G1600-67220 | CE-MS PVA capillary w/o window |
| G1600-67312 | CE-MS fused silica capillary w/o window |
| G1600-68706 | HPCE startup kit |
| G1600-68723 | High Sensitivity Cell Kit for HP 3DCE |
| G1607-20030 | Gasket |
| G1607-60041 | ES needle assembly for CE-MS |
| G1680-63200 | USB-GPIB cable |
| G1680-63715 | PCI GPIB Card for Windows NT, 2000, XP |
| G1680-63720 | USB 2.0 Cable (10 ft.) |
| G1811-23200 | Beveled edge needle for G1811A |
| G1820-60160 | Sample line connector for concentric neb |
| G1820-60393 | Sampling and skimmer cone wrench (4500) |
| G1820-65008 | PTFE tubing for carrier/makeup gas, 1m |
| G1820-65009 | PFA sample tubing kit(0.5mm id,1.6mm od) |
| G1820-65018 | Filter for cooling water for 7500 Series |
| G1820-65023 | Ar gas tubing kit (incl.filter) |
| G1820-65025 | O-Ring for sampling cone, Viton, 1/pk |
| G1820-65027 | Connectors for Plasma + Aux. gas, 1 ea |
| G1820-65052 | Carrier gas line connector for conc. neb |
| G1820-65075 | O-Ring kit, concentric neb. ICP-MS, 1/pk |
| G1820-65105 | PFA sample tubing, 0.5mm id,1.6mm od,5m |
| G1820-65119 | Connector, blend gas line, Crossflow 2/p |
| G1820-65141 | Sample tubing kit for Cross flow neb |
| G1820-65214 | Carrier gas line connector Babington neb |
| G1820-65276 | Sample tubing w/connector for Babington |
| G1820-65345 | Babington Nebulizer Removal Tool |
| G1820-65435 | Screws for Skimmer Base (4/pk) |
| G1820-65478 | PFA sample tubing, 0.3mm od,1.6mm od,3m |
| G1820-65482 | Bushing at spray chamber drain (5/pk) |
| G1820-65503 | Connector for Spray Chamber Drainage |
| G1820-65504 | Bushing at spray chamber drain, organic |
| G1820-65505 | Drain tank for organic solvent, 2L. 1/pk |
| G1820-65515 | Tubing for Drainage (4.0mm id, 2.5m) |
| G1820-65526 | Tubing w/guide 0.15 id, 1.6 od, 70cm 5/p |
| G1820-65527 | Tubing w/guide 0.2id, 1.6od, 70cm, 5/pk |
| G1820-65531 | Tubing w/guide 0.3id, 1.6od, 70 cm, 5/pk |
| G1820-65533 | Ferrule + O-ring kit for carrier gas 1/p |
| G1820-65541 | Basic LC connection kit |
| G1820-80341 | Ar Gas Filter |
| G1820-81012 | Body Tube assembly (nning gauge) |
| G1820-81013 | Electrode kit for nning Gauge |
| G1833-65024 | Screw/Spacer kit-Extract.Lens(7500a/i/s) |
| G1833-65025 | Screw/Spacer Kit for Ion Lens(7500a/i/s) |
| G1833-65071 | Online ISTD Addition kit (7500 only) |
| G1833-65079 | Interface wrench, skimmer cone removal |
| G1833-65088 | Screw kit for reaction cell 7500 series |
| G1833-65089 | Tubing for reaction gas, 2/pk |
| G1833-65094 | Octopole for 7500 Series |
| G1833-65096 | ORS CLEANING KIT |
| G1833-65125 | Screw + spacer kit for ion lens,7500cs |
| G1833-65133 | Octopole for 7500cs/ce/cx |
| G1833-65134 | Octopole Assy for 7500cs/ce/cx |
| G1833-65138 | Reaction Cell Screw and Spacer Kit |
| G1833-65332 | O-rings for vent valve, Viton 2/pk |
| G1833-65404 | Polishing par kit 5 shts No.400+1200 |
| G1833-65405 | Interface wrench, sampling cone removal |
| G1833-65411 | Drain tubing kit, s/chamber to ri pump |
| G1833-65412 | Plastic tray for sample intro area |
| G1833-65413 | Extraction lens 2 for 7500a/i/s |
| G1833-65414 | PTFE tubing for carrier/Makeup gas, 2/pk |
| G1833-65417 | Extraction lens 1 for 7500a/i/s |
| G1833-65418 | Omega lens assembly for 7500a/i/s |
| G1833-65427 | Quartz T-connector for optional gas |
| G1833-65429 | Hose,for cooling water, 10m |
| G1833-65444 | Plate bias (for Slim ring Q-pole), 7500 |
| G1833-65464 | Connector polyprop use w/inert intro kit |
| G1833-65477 | Makeup gas line connector,Luer ty,7500 |
| G1833-65494 | Plate Bias (Eagle Q-pole) 7500a/i/s/c/cs |
| G1833-65499 | Extraction lens for 7500c |
| G1833-65500 | Einzel lens 1 for 7500C |
| G1833-65501 | Einzel lens 2 for the 7500c |
| G1833-65502 | Einzel lens 3 for the 7500c |
| G1833-65503 | Octopole assy for 7500c |
| G1833-65572 | PFA sample tubing 0.15 id, 1.6 od, 70 cm |
| G1833-65573 | PFA sample tubing,0.2 id,1.6 od,70cm,3/p |
| G1833-65577 | PTFE ta for ristaltic pump |
| G1833-65578 | Screw + spacer kit for Agilent 7500c |
| G1833-65582 | Fitting for drain tubing (10/pk) |
| G1833-65583 | Carrier gas line connector Microflow neb |
| G1833-65592 | Extraction lens 1 for s-lens for ICP-MS |
| G1833-65593 | Extraction lens 2 for s-lens for ICP-MS |
| G1833-65594 | Omega bias lens for 7500cs |
| G1833-65595 | OMEGA LENS For 7500CS |
| G1833-65596 | Extraction-Omega lenses assy 7500cs |
| G1833-65597 | Cell Focus lens for 7500cs |
| G1833-65598 | Cell Entrance lens for 7500cs |
| G1833-65599 | Focus lens for Q-pole, 7500ce,cx,cs |
| G1833-66000 | Cell Exit lens for 7500cs |
| G1833-66001 | Reaction cell assembly for 7500cs |
| G1833-66011 | Alignment Plate for RF Coil, ICP-MS |
| G1833-66024 | Strainer for cooling water |
| G1833-66035 | O-Ring for Reaction cell, 7500ce/cx, 2/p |
| G1833-66042 | O-Ring for water filter cartridge, 7500 |
| G1888-60701 | Headspace Leak Test Kit |
| G1946-20087 | Skimmer 2 |
| G1946-20089 | Skimmer 1 |
| G1946-20213 | Ferrule, Nebulizer, Polyimide + Graphite |
| G1946-20215 | Nebulizer Adjustment Fixture |
| G1946-20274 | Flanged Needle Holder |
| G1946-20301 | H.T. Capillary cap |
| G1946-60157 | LCMS TOOL KIT |
| G1946-67037 | Tested APCI Nebulizer Assembly |
| G1946-67098 | Tested ESI Nebulizer Assy |
| G1946-67260 | Microflow Nebulizer Assy |
| G1946-68703 | ESI Nebulizer Accessory Ship Kit |
| G1946-68704 | APCI Needle Replacement Kit |
| G1946-80009 | Glss Cplry for G1946A-C |
| G1946-80049 | Nebulizer 25X Magnifier |
| G1946-85020 | Delay Calibrant |
| G1946-85021 | Ammonium Formate for LC/MS |
| G1947-20029 | Corona Needle APCI, 1 each |
| G1958-60137 | Nebulizer(needle SST316 replacement) kit |
| G1958-67098 | ES Tested Nebulizer, Support Assy |
| G1960-20030 | APCI Needle |
| G1960-20032 | ESI Needle |
| G1960-20033 | Microflow Neb Needle |
| G1960-80060 | Capillary, FS, 0.6MM |
| G1964-80659 | Capillary, 6 x 0.61mm x 90mm, 1G |
| G1969-85000 | ESI-L Low Concentration Tuning Mix 100ml |
| G1969-85001 | API-TOF Reference Mass Solution Kit |
| G1969-85003 | 1S-TOF Biopolymer Anlys Ref Mass Sol Kit |
| G1969-85020 | MMI-L Low Concentration Tuning Mix 100ml |
| G1972-60025 | Target Plate for AP-MALDI LC/MS |
| G1972-85000 | AP-MALDI Matrix Dilution Solvent |
| G1978-85000 | ESI/ APCI LC Demo Sample, 5 ampoules 1mL |
| G1982-85001 | Chip Cube High Mass Reference (HP-1221) |
| G1982-85002 | Chip Cube High Mass Solvent (FC-70) |
| G1982-85003 | Chip Cube Low Mass Reference sample |
| G1999-20021 | 5973 Gold Fil Screw (M2 X 0.4 10MM-LG) |
| G1999-20446 | 73CI Drawout Plate |
| G2037A | Alpha-Cyano-4-Hydroxycinnamic Acid |
| G2038A | Sinapinic Acid Matrix (3x3 ml) |
| G2039A | 2.5 Dihydroxybenzoic Acid Matrix |
| G2173-64000 | Agilent LC Diagnostic CD ROM |
| G2250-04500 | Rack holding 1100 tray for G2250A |
| G2250-04501 | Rack 209 for 2ml vials (12 x 32mm), 96 |
| G2250-04504 | Rack, 205H for 2 deep wellplates |
| G2250-87300 | Capillary, 1um, 0.17mm id 1/16in male |
| G2258-23101 | Piston guide, EK for G2258A ALS |
| G2258-23201 | Frit Adapter, PTFE for 18" od tubing |
| G2258-60002 | Buffer loop extension assy for G2258A |
| G2258-60003 | Piston for G2258A Dual Loop ALS, 5 mL |
| G2258-60011 | Tray for Well Plate Autosampler |
| G2258-68710 | Needle Kit for G2258A Dual Loop ALS |
| G2258-87102 | Twin needle seat assy for G2258A |
| G2258-87300 | Buffer Loop Tubing Assy, PTFE |
| G2258-87301 | Capillary inj valve to preparative head |
| G2258-87307 | Drawing Tube Assy for flush solvent |
| G2258-87310 | Waste tube, 0.8 mm id, 15 cm long |
| G2258-87312 | Front seat tube PTFE 0.25mm id 10cm long |
| G2258-87313 | Back seat tube PTFE 0.25mm id 12 cm long |
| G2258-87314 | Tubing assy, solvent flush for G2258A |
| G2258-87315 | Back Seat Tube, SST 0.5 mm id 12 cm long |
| G2258-87316 | Front seat tube SST 0.5 mm id 10 cm long |
| G2260-68711 | 5ml Multi draw loop for use with G2260A |
| G2260-87101 | Needle seat for G2260A autosampler |
| G2260-87201 | Needle assy for G2260-87101 needle seat |
| G2260-87300 | Capillary sampler to column, SST |
| G2260-87301 | Capillary pump to sampler,SST40cm,0.50mm |
| G2350-61090 | Discharge Tube Kit for G2350 |
| G2397-20540 | Micro ECD Mixing Liner |
| G2397-60510 | Micro ECD Assy |
| G2397-60515 | MicroECD Assy.-Japan Labeled |
| G2398-60515 | MicroECD-Japan GENERAL |
| G2421-60001 | ESI Tuning Mix 100ml |
| G2425A | APCI Negative Ion rformance Standard |
| G2427A | API-ES Nebulizer needle (ea) |
| G2428A | APCI Nebulizer Needle (ea) |
| G2431A | ESI Tuning Mix (for Ion trap) 100ml |
| G2440-60200 | Ceramic Channel Electron Multiplier AY |
| G2441-80010 | Electron Multiplier Ceramic Channel |
| G2455-85001 | HSA ptide Standard Mix Kit |
| G2474-85000 | Fluoranthene, 99pct, bottle of 5 g |
| G2474-85001 | Phosphoptide Standard Mixture |
| G2571-80103 | Electron multiplier horn, high gain |
| G2589-20043 | 5973 Inert/Ultra Ion Source Body |
| G2589-20044 | 73 G2860A Reller Ultra Clean |
| G2589-20045 | 73 G2860A DrawoutP |
| G2589-20100 | 73inert Draw out plate, 3mm |
| G2589-20101 | Inert Source Washer |
| G2617-60507 | PTV Septumless head, 6890 |
| G2617-80550 | PTV COL ADAPTER TUBE |
| G2630-60710 | Oven exhaust deflector for 6850 |
| G2855-20530 | Internal Nut,CFT Capillary fitting |
| G2855-20532 | Internal nut, CFT 1/16inch SS fitting |
| G2855-20590 | Column storage fitting |
| G2855-60200 | Ferrule Pre-Swage Tool,Capillary Flow |
| G2855-60570 | Plug for microfluidic manifold or unions |
| G2860A | Standard 5973/75 Extended Linearity Appl |
| G2933-85003 | Sulfur Trap for SCD |
| G3138-65000 | ISIS Tubing kit |
| G3138-65102 | Joint Holder for Agilent 7500 ISIS Pump |
| G3138-65103 | Joint Holder for ISIS Pump |
| G3138-65104 | Sample Line Connector,ISIS |
| G3138-65117 | Rotor Seal for Valve,ISIS |
| G3138-65118 | Nut for valve, ISIS, 6/pk |
| G3138-65119 | Ferrule for valve, ISIS, 6/pk |
| G3138-65121 | Mixer for ISIS |
| G3138-65122 | Sample loop, 100 uL, ISIS |
| G3138-65125 | Plastic Tray ISIS |
| G3138-65129 | Plug for Cross Joint, 3pcs. |
| G3138-65130 | Gas/Liquid Separator set,ISIS |
| G3138-65131 | Separator Gas Chamber,ISIS |
| G3138-65132 | O-ring for the Filter,ISIS |
| G3138-65133 | Separator Holder,ISIS |
| G3138-65134 | Exclusive Concentric Nebulizer,ISIS |
| G3138-65136 | Cyclone Chamber,ISIS |
| G3138-65137 | Membrane filter, 10/pk, ISIS |
| G3138-65138 | Tubing for Gas Line,PTFE,3.0mm ID,5m |
| G3138-65139 | Reducing Union Connector,6mm x 3mm,ISIS |
| G3138-65140 | Reducing Union Connector,6mm x 4mm,ISIS |
| G3138-65141 | Plug for Carrier Gas Connector,3/Pk,ISIS |
| G3138-65144 | Reducing Union connector,8mm x 4mm, ISIS |
| G3138-65157 | Ferrule for 0.25 mm id pump tubing |
| G3138-65158 | ISIS Tubing adapter (ISTD/ripump) |
| G3154-65001 | As sciation column for drinking water |
| G3154-65002 | Guard column for AS sciation |
| G3154-90011 | As Sciation Analysis Handbook |
| G3154-96011 | As Sciation Analysis Handbook (JP) |
| G3158-20004 | Clamp Plate (EK) |
| G3158-60010 | PFA tube 1/8inch, 2 m |
| G3158-65000 | Transfer line,GC-ICP-MS Interface, 7500 |
| G3158-65001 | Injector assembly for GC interface, 7500 |
| G3158-65002 | SS Pi,1/16in,with connector,GC-ICP-MS |
| G3158-65003 | Stainless steel pi 1/16 in GC-ICP-MS |
| G3158-65004 | Ferrule kit for GC-ICP-MS Interface |
| G3158-65005 | Graphite ferrule for GC-ICP-MS Interface |
| G3158-65006 | Xe Gas Mixture T union |
| G3158-65007 | Torch for GC-ICP-MS Interface, 7500 |
| G3158-65008 | Alignment Boss GC-ICP-MS |
| G3158-65009 | Ball Joint GC-ICP-MS |
| G3158-80009 | Nut for connecting transfer line, ICP-MS |
| G3158-80050 | Injector assembly for GC-ICP-MS |
| G3158-80060 | Transfer line for GC-ICP-MS Interface |
| G3158-80074 | Torch for GC-ICP-MS Interface |
| G3158-80080 | Pre-heating pi w/connector GC-ICP-MS |
| G3158-80081 | Stainless steel pi, 1/16 in GC-ICP-MS |
| G3158-90021 | GC Interface Manual |
| G3160-60015 | Holder for carry tray cover, I-AS |
| G3160-65306 | PFA needle 0.3 mm id, std probe for I-AS |
| G3160-65307 | External rinse bottle 100mL, w/caps, 6/p |
| G3160-65320 | Rinse solution inlet/outlet tubing, I-AS |
| G3160-65321 | Tray Cover,I-AS |
| G3160-65324 | PFA Needle, 0,8 mm ID |
| G3160-65325 | Tubing holder, EK, micro flow neb. |
| G3160-65328 | Drain tube to rinse + drain bottles I-AS |
| G3160-67000 | Drain tube Tygon, 3/32 x 5/32, 5m |
| G3160-80041 | Needle holder for I-AS |
| G3160-80043 | Washing bottle,I-AS |
| G3160-80060 | I-AS tray A, 89 positions for 6 mL vials |
| G3160-80061 | I-AS Tray B, 53 positions for 18mL vials |
| G3160-80062 | I-AS Tray C, 18 positions for 50mL vials |
| G3160-80063 | I-AS tray D, 79x2mL + 10x18mL positions |
| G3160-80064 | I-AS tray E, 79x6mL + 10x18mL positions |
| G3160-80065 | I-AS Tray F, 15 places for 48mm od vials |
| G3160-80200 | Serial-USB Converter cable for I-AS |
| G3160-90021 | Integrated Autosampler (I-AS) Manual |
| G3160-96021 | Integrated Autosampler (I-AS) Man'l (JP) |
| G3163-20530 | RTGA Draw out Plate |
| G3169-60170 | Anodized Reller Assembly (SST) |
| G3170-20126 | Entrance Lens Assembly (HM) |
| G3170-20530 | Lens insulator,597X MSD |
| G3170-60171 | 5975C Inert EI 350 Reller Assembly |
| G3170-60172 | 5975C SST EI 350 Reller Assembly |
| G3170-60416 | 5977 CI 350 Reller Heater assembly |
| G3170-80002 | 5975 Calibrant Bulb |
| G3170-80006 | Foreline Pump Exhaust Fitting |
| G3170-80103 | Triple axis electron multiplier, 5975 |
| G3170-80105 | Triple Axis Detector Assy,5975 Ceramic |
| G3182-61580 | Ultimate Union Kit, Deactivated |
| G3182-61581 | Ultimate Union Kit, non-deactivated |
| G3184-60065 | Tee,inert for capillary flow technology |
| G3185-60300 | QuickSwap Restrictor Variety Pack |
| G3185-60361 | QuickSwap Restrictor, 0.092 ID, 4Pack |
| G3185-60362 | QuickSwap Restrictor, 0.100 ID, 4 Pack |
| G3185-60363 | QuickSwap Restrictor, 0.110 ID, 4 Pack |
| G3185-60364 | QuickSwap Restrictor, 0.120 ID, 4 Pack |
| G3199B | Quiet Cover II for LCMS rough pump |
| G3268-80001 | Cr sciation column for drinking water |
| G3270-20067 | Plug for make-up gas conn HMI 7500s.1/pk |
| G3270-60207 | End Cap assembly for HMI kit, 7500 |
| G3270-60639 | Screw + spacer kit extraction Omega lens |
| G3270-65001 | Basic Consumables Kit for 7500cx ICP-MS |
| G3270-65002 | Comprehensive consumables kit for 7500cx |
| G3270-65006 | Comprehensive consumables kit for 7500A |
| G3270-65007 | Comprehensive consumables kit for 7500cs |
| G3270-65021 | Plasma and Aux gas line tubing set.2/pk |
| G3270-65023 | Extraction-Omega lens assy for 7500ce/cx |
| G3270-65028 | Extraction Lens 1 for 7500ce/cx |
| G3270-65029 | Extraction lens 2 for 7500ce/cx |
| G3270-65030 | Omega Lens for 7500ce/cx |
| G3270-65031 | Omega bias lens for 7500ce/cx |
| G3270-65035 | Stainless steel tubing, 1/8in od, 6m |
| G3270-67003 | Sampling Cone,Nickel Plated |
| G3270-80024 | Quartz connector tube, dilution, HMI kit |
| G3270-80026 | Quartz connector tube, Oxygen, HMI kit |
| G3270-80300 | Spray chamber ultra trace B analysis 1/p |
| G3280-01507 | Interface wrench for Sampling cone |
| G3280-01650 | Omega bias lens for ICP-MS x-lens |
| G3280-20504 | Retaining ring, sampling cone, ICP-MS |
| G3280-20576 | Plug for dilution port (1/8 inch) |
| G3280-20618 | Cell entrance lens, ICP-MS, 1/pk |
| G3280-20628 | Deflect lens, ICP-MS, 1/pk |
| G3280-20633 | Cell focus lens, ICP-MS, 1/pk |
| G3280-20646 | Omega bias lens for s-lens, ICP-MS |
| G3280-20653 | Omega lens for s-lens, ICP-MS |
| G3280-20663 | Tubing for reaction cell gas, 1/pk |
| G3280-20664 | Cell exit lens, ICP-MS. 1/pk. |
| G3280-40103 | Sample tray for ICP-MS, 1/pk. |
| G3280-60077 | Tygon tubing (3m), for ICP-MS |
| G3280-60160 | Ar gas tubing kit for x-lens, ICP-MS |
| G3280-60163 | Ar gas tubing kit for s-lens, ICP-MS |
| G3280-60381 | Offset skimmer assembly, 1pk. |
| G3280-60502 | Interface wrench, skimmer cone removal |
| G3280-60555 | Drain tubing assembly for ICP-MS |
| G3280-60580 | Organic solvent introduction kit, ICP-MS |
| G3280-60590 | On-line Int Standard addition kit ICP-MS |
| G3280-60609 | Omega lens for x-lens, ICP-MS, 1/pk |
| G3280-60612 | Extraction lens 1 for x-lens for ICP-MS |
| G3280-60613 | Extraction lens 2 for x-lens for ICP-MS |
| G3280-60615 | Plate bias for ICP-MS |
| G3280-60650 | Reaction cell assembly, ICP-MS |
| G3280-60671 | Offset skimmer tool, ICP-MS, 1/pk |
| G3280-60910 | Maintenance Video/DVD for ICP-MS |
| G3280-67003 | Basic consumables kit, ICP-MS |
| G3280-67004 | Comprehensive spares kit ICP-MS w/x-lens |
| G3280-67007 | Comprehensive spares kit ICP-MS w/s-lens |
| G3280-67022 | Carrier/Make-up/Dilution gas tubing |
| G3280-67023 | Plasma/Aux gas tubing with inner sleeve |
| G3280-67035 | Extraction-Omega lens assy for s-lens |
| G3280-67037 | Screw and spacer kit for x-lens, ICP-MS |
| G3280-67038 | Screw and spacer kit for s-lens, ICP-MS |
| G3280-67039 | Extraction-Offset lens assy for x-lens |
| G3280-67044 | Screw/Spacer/O-ring for cell, ICP-MS |
| G3280-67045 | Octopole assembly, ICP-MS, 1/pk |
| G3280-67046 | Manual vent valve for ICP-MS, 1/pk |
| G3280-67062 | T-Joint with Earth block for ICP-MS, 1/p |
| G3280-67085 | Comprehensive spares kit, 7700e ICP-MS |
| G3280-67110 | Spacer (deflect/plate b.), 4/pk |
| G3280-80503 | Scial spray Chamber (long arm), ICP-MS |
| G3280-90002 | 7700 Series ICP-MS Hardware Manual |
| G3280-90006 | 7700 Hardware Maintenance Manual |
| G3280-90007 | 7700 Hardware Maintenance Manual |
| G3280-90036 | MassCard for 7700 and 8800 ICP-MS 100/pk |
| G3280-96002 | 7700 Series ICP-MS Hardware Manual (JP) |
| G3280-96006 | 7700 Hardware Maintenance Man'l-Japanese |
| G3280-96007 | 7700 Hardware Maintenance Manl-Japanese |
| G3286-90013 | ASX-500 Series Autosampler Manual |
| G3286-96013 | ASX-500 Series Autosampler Manual(JP) |
| G3288-80000 | As sciation column for ICP-MS |
| G3292-80010 | Poly-Clear fluid (for G3292A Chiller) |
| G3292-80109 | Fluid Filter (for G3292A Chiller) |
| G3292-80112 | Air Filter for G3292A Chiller |
| G3431-60680 | FID Ignitor Cable |
| G3432-60220 | TCD Base Assembly - Tested |
| G3433-63000 | Micro ECD Mug Adapter |
| G3434-60806 | NPD bead,Blos |
| G3435-60330 | FPD+ Exit Tube Assembly |
| G3435-60350 | Packed-Capillary Adapter Assembly |
| G3452-60570 | Cap Inlet Shell Weldment,7890, Inert |
| G3452-60586 | Capillary Insert Weldment, Inert, 7890 |
| G3452-60730 | Split/Splitless Inlet Insert w/Vent Full |
| G3452-60835 | Septum Retainer Nut for Transfer Line |
| G3480-67585 | 7890 Insert Weldment Assembly, Valves |
| G3510-20018 | Column Nut Adapter - Graphite |
| G3660-90001 | 8800 Hardware Maintenance Manual |
| G3660-90002 | 8800 Hardware Maintenance Manual |
| G3690A | Comp spares, ICP-MS w/x-lens, excl cones |
| G3850-80650 | Exhaust Deflector Assembly, GC/QTOF |
| G3870-20440 | Extraction Source Body |
| G3870-20444 | Extraction Lens, 3mm |
| G3870-20445 | Insulator, Extraction Lens Ring |
| G3870-20448 | Extraction Lens, 6mm |
| G3870-20449 | Extraction Lens, 9mm |
| G3870-20530 | Extraction Lens Insulator |
| G3870-67171 | 5977 Extraction EI 350 Reller Assembly |
| G3870-67172 | 5977 SST EI 350 Reller Assembly |
| G3870-67173 | 5977 EI Inert 350 Reller Assembly |
| G3970A | Inert Flow Path Upgrade kit, 7890 |
| G4204-40000 | Clamp for in-line filter |
| G4204-40005 | EK seal for inlet weaver assembly |
| G4204-60004 | Outlet filter 1290 quat-pump |
| G4204-60022 | Inlet Valve 1290 quat-pump |
| G4204-81090 | Low pressure mixer assembly |
| G4208-68700 | USB Memory Stick for G4208A, |
| G4212-60007 | Max-Light Cartridge Cell 60mm |
| G4212-60008 | Max-Light Cartridge Cell 10mm V(o)1.0ul |
| G4212-60011 | Max-Light Cartridge Test Cell |
| G4212-60022 | Pressure relief valve |
| G4212-60032 | 3.7 mm HDR max light cartridge cell |
| G4212-60038 | 10 mm ULD max light cartridge cell |
| G4212-68001 | Agilent Inline Pressure Relief Valve Kit |
| G4216-68711 | Large volume injection kit for 1290 |
| G4218-20000 | Standard Flow Nebulizer |
| G4218-20001 | Semi Micro Flow nebulizer |
| G4218-20002 | Large Flow Nebulizer |
| G4218-20003 | Micro Flow Nebulizer |
| G4218-20004 | RRLC Nebulizer for G4218A ELSD detector |
| G4218-40000 | Nebulization chamber,glass |
| G4218-40010 | Black plastic nut, 13mm dia-glassware |
| G4218-40011 | Black plastic nut, 22mm dia-glassware |
| G4218-40100 | Drain tube with stainless steel fitting |
| G4218-40110 | Black exhaust tube,2.5m |
| G4218-40130 | Bulkhead |
| G4218-40150 | Cartridge 0.01 um for gas regulator |
| G4218-40220 | Pneumatic tube with SS fitting,check |
| G4218-60100 | Gas regulator w filter 0.01um, manometer |
| G4218-68010 | Seal kit for nebulization chamber |
| G4220-20001 | Spacer Fitting |
| G4220-20020 | Internal gold seal for 1290 outlet valve |
| G4220-60006 | Jet Weaver, 35 ul/100 ul |
| G4220-60007 | Bottle Head Assembly |
| G4220-60012 | Jet Weaver 380 ul |
| G4220-60015 | Support ring integrated for 1290 pump |
| G4220-60016 | Seal holder integrated for 1290 pump |
| G4220-60017 | Bottle Head Assembly Ultra Clean Tubing |
| G4220-60022 | Inlet Valve |
| G4220-60028 | Outlet Valve 1290 Infinity pump |
| G4220-60035 | Tubing kit 140mm, 2/pk |
| G4220-60070 | Tubing Kit 140mm - Ultra Clean Tubing |
| G4220-60122 | 1290 Infinity inlet valve ty N |
| G4220-60128 | 1290 Infinity outlet valve ty N |
| G4220-63010 | Support ring 1290 InfinityLC w/seal wash |
| G4220-68070 | Ultra Clean Tubing Kit for G4220A |
| G4220-68705 | Accessory kit 1290 Infinity pump |
| G4220-87000 | Capillary interconnect assembly |
| G4226-60021 | Micro Vial Tray |
| G4226-60301 | SST Cap. 0.17mm ID 160mm pre-swaged |
| G4226-60310 | Loop assembly |
| G4226-67001 | Door repair kit for 1290 sampler |
| G4226-68735 | PM KIT for HiP Sampler G4226A |
| G4226-87012 | Seat assembly 0.12mm 1290 Infinity LC |
| G4226-87020 | Needle seat 1290 low disrsion |
| G4226-87201 | Needle Assembly |
| G4240-23705 | Rotor, Inner Valve, 3grooves, Chip LC |
| G4240-25206 | Rotor Outer Valve, 5grooves, Chip LC |
| G4240-43200 | EK fitting,scial for Chip-LC |
| G4240-64025 | mAB-Glyco Enablement Kit |
| G4240-87300 | Fused Silica/EK Capillary, 15um 90cm |
| G4240-87301 | Fused Silica/EK Capillary 25um,105cm |
| G4240-87302 | Fused Silica/EK Cap 100um,100cm |
| G4240-87303 | Fused Silica/EK Cap 75um,100cm |
| G4240-87304 | Fused Silica/EK capillary 50um 50cm |
| G4240-87309 | EK capillary, 25um x 105cm |
| G4240-87310 | EK Capillary, 25um x 10cm |
| G4280-60004 | Dual channel gradient valve |
| G4280-60029 | Solvent selection valve for 1120 |
| G4280-60031 | Purge valve assy for 1120 Compact LC |
| G4280-60033 | Purge valve actuator for compact LC |
| G4280-60034 | Tubing,PTFE,16cm with fittings,3mm od |
| G4280-60061 | Purge Valve 1220 |
| G4280-60500 | Passive inlet valve replacement kit |
| G4280-67304 | LC pump connecting tube,PTFE |
| G4280-68708 | Solvent selection valve kit f. 1120/1220 |
| G4280-68710 | PM Kit 1120 Compact LC,Manual Injector |
| G4280-68730 | PM Kit 1120 Compact LC,Auto Injector |
| G4280-68750 | PM Kit for 1220 LC with manual |
| G4280-68770 | PM Kit for 1220 LC with ALS |
| G4280-81300 | Capillary,damr 1,SS,0.6mm id |
| G4280-81301 | Capillary,damr 2,SS,0.6mm id |
| G4280-87305 | Narrow bow EK capillary 0.18 mmid 21cm |
| G4301-60100 | Flow cell for 1260 Infinity SFC |
| G4301-60120 | Wash Pump Check Valve PKG OF 2 |
| G4301-60130 | Wash Pump Piston Assy |
| G4301-60140 | Wash Pump Seal Kit for 1260 Infinity SFC |
| G4301-60150 | Wash Pump Transfer Line |
| G4301-60160 | Wash Pump Transfer Line (EVO) |
| G4301-60210 | Check Valve Cartridge; 0.125 ball |
| G4301-60230 | Check Valve Holder (A5) |
| G4301-60240 | Check Valve Gasket, 5pk |
| G4301-60241 | Check Valve Gasket Outlet |
| G4301-60250 | A5 Pump Seals, for 1260 Infinity SFC,2pk |
| G4301-60260 | Booster Pump Head for 1260 Infinity SFC |
| G4301-60300 | CO2 Supply Line for 1260 Infinity SFC |
| G4301-60310 | Pump Transfer Line for 1260 Infinity SFC |
| G4301-60320 | Return Transfer Line |
| G4301-60330 | Pressure sensor Witness line long |
| G4301-60340 | Pressure sensor Witness line short |
| G4301-60350 | Tee for Valco for 1260 Infinity SFC |
| G4301-60560 | Cross and Cap. Kit for Aux Pres.Sensor |
| G4302-60066 | Inlet Valve for SFC Pump |
| G4309-68000 | SFC MS connection Kit |
| G4513-20561 | Mounting post for 7693 and 7650 ALS |
| G4513-40525 | Needle support insert, standard, 7693 |
| G4513-40529 | Needle support insert, on column, 7693 |
| G4514-60710 | Gripr finger caps for 7693 |
| G4514-67505 | Vial rack kit, 3 Racks, 3 white labels |
| G4522-60500 | Metal Vial Rack Assy. |
| G4525-60701 | Vial rack label kit for 7693 |
| G4556-60019 | 7697A Tray Rack |
| G4556-60125 | 7697A Sample Probe, Deactivated SN 2000 |
| G4556-60690 | 7697A Sample Probe, Deactivated SN 1030 |
| G4556-67010 | Leak Test Kit |
| G4556-80101 | Sample loop, Headspace 0.025 ml, SN2000 |
| G4556-80102 | Sample loop, Headspace 0.05 ml, SN2000 |
| G4556-80103 | Sample loop, Headspace 0.10 ml, SN2000 |
| G4556-80105 | Sample loop, Headspace 0.50 ml, SN2000 |
| G4556-80106 | Sample loop, Headspace 1.00 ml, SN2000 |
| G4556-80108 | Sample Loop, HS 3.00 ml, SN2000 |
| G4556-80109 | Sample loop, HS 5.00 ml, SN2000 |
| G4556-80111 | Sample loop, Headspace 0.025 ml, SN1030 |
| G4556-80112 | Sample loop, Headspace 0.05 ml, SN1030 |
| G4556-80113 | Sample loop, Headspace 0.10 ml, SN1030 |
| G4556-80115 | Sample loop, Headspace 0.50 ml, SN1030 |
| G4556-80116 | Sample loop, Headspace 1.00 ml, SN1030 |
| G4556-80118 | Sample Loop, HS 3.00 mL, SN1030 |
| G4556-80119 | Sample Loop, HS 5.00 mL, SN1030 |
| G4556-80126 | Sample Loop, HS, Cert. 1.00 mL, SN2000 |
| G4556-80128 | Sample Loop, HS, Cert. 3.00 mL, SN2000 |
| G4556-90500 | 7697A Tray labels |
| G4911-01201 | Joint holder for nebulizer pump, ICP-MS |
| G4911-20021 | ri pump tubes adapter (for 2.29mm id) |
| G4911-60011 | Tray for ISIS used with ICP-MS |
| G4911-67001 | Comprehensive spares kit for ISIS-DS |
| G4911-68201 | Preconfigured kit, ISIS Auto-dilution |
| G4911-68202 | Preconfigured kit ISIS Discrete sampling |
| G4911-68210 | Hydride Generation kit for ISIS |
| G4911-90021 | ISIS Manual, ICP-MS, 1/pk |
| G4911-96021 | ISIS Manual (JP), ICP-MS, 1/pk |
| G5201-60000 | Tray for G5201A Mass Code UV |
| G5201-60100 | Lamp assembly for G5201A Mass Code UV |
| G5611-21503 | Bio-inert piston seal |
| G5611-26210 | Bio-inert seal keer |
| G5611-60016 | Seal holder for Bio inert pump |
| G5611-60020 | Bio-Inert Cartridge Active Inlet Valve |
| G5611-60025 | Bio-inert active inlet valve |
| G5611-60061 | Bio-Inert Purge Valve |
| G5611-60067 | Bio-inert outlet ball valve |
| G5611-63010 | Bio-inert support ring |
| G5611-68741 | PM kit for Bio inert quat pump |
| G5615-60005 | Bio-inert FLD flow cell |
| G5615-60017 | Max-Light Cartridge Cell 60mm BIO |
| G5615-60018 | Max-Light Cartridge Cell 10mm BIO |
| G5615-60022 | Bio-inert standard flow cell, RFID tag |
| G5615-87302 | Capillary PK 0.17 x 210mm SL/UB |
| G5615-87331 | Capillary Holder Cell 0.17mm BIO |
| G5664-68712 | Analytical Tubing Kit ID0.25mm PTFE-ESD |
| G5664-86703 | Bio inert EK tube from valve to needle |
| G5664-86706 | Bio inert EK tube valve to detector |
| G5667-40500 | Tool for needle adjustment |
| G5667-60320 | Sample loop 100uL Bio-inert |
| G5667-68735 | PM Kit for the Bio-Inert Sampler G5667A |
| G5667-87017 | Bio-inert seat assembly, 0.17 x 100 mm |
| G5667-87200 | Bio-inert needle assembly |
| G6011A | Quiet Cover MS for MS40 Pump |
| G6012A | Quiet Cover DS |
| G6014A | Quiet Cover for GCMS |
| G6500-60701 | ITEX-II Tenax Trap, TA 80/100, 3 pieces |
| G6500-88005 | Injection unit tension cord black, 280mm |
| G6500-88014 | Tension Cord, for GC/HTC Needle Guide |
| G6600-60028 | Quartz Tube Replacement Kit for SCD |
| G6600-60034 | Ceramic Tube Package,for SCD(before 8/95 |
| G6600-60035 | Ceramic Tube Kit for SCD/NCD SS Burner |
| G6600-60037 | Ceramic Tube Kit for SCD DP Burner |
| G6600-60038 | Ceramic/Quartz Tube Kit for NCD DP Burnr |
| G6600-60102 | No PT Screen Quartz Tube of NCD Burner |
| G6600-67007 | 12 Month PM Kit, RV5 Oil Pump for XCD |
| G6600-67008 | 12 Month PM Kit, Dry Piston Pump for XCD |
| G6600-80018 | Spare Column Nut and Ferrule kit |
| G6600-80042 | Replacement Oil Coalescing Filter |
| G6600-80043 | Oil Mist Filter for RV5 pump;SCD/NCD |
| G6600-80044 | Replacement Oil Coalescing Filter |
| G6600-80045 | Replacement Odor Filtration Element |
| G6600-80050 | O-Ring, 1.614 inch ID, Size 2-030 |
| G6600-80051 | O-Ring, 1.301inch ID for SCD/NCD |
| G6600-80063 | Dual Plasma Quartz Tube for NCD |
| G6600-85000 | Ozone Destruction Chemical Trap;SCD/NCD |
| G6600-85001 | Mobil 1 Synthetic Oil |
| G6600-85002 | Oil,Edwards Ultragrade,1L |
| G7005-60061 | Filament,high temrature EI for GCMS |
| G7005-60072 | CI Filament- 2PK |
| G7005-60170 | RIS Probe Maintenance Kit |
| G7100-60002 | Capillary cassette |
| G7100-60007 | Electrode assemb. standard for G7100only |
| G7100-60033 | Electrode assy short for G7100 only |
| G7100-60150 | Alignment interface for ext cap 25um id |
| G7100-60210 | Alignment interface for std cap 50um id |
| G7100-60230 | Alignment interface for ext cap 50um id |
| G7100-60310 | Alignment Interface for std cap 75um id |
| G7100-60330 | Alignment interface for ext cap 75um id |
| G7100-60400 | Alignment interface CE-MS cap 360um OD |
| G7100-62700 | 260nm Detector Filter Assembly |
| G7100-68705 | Agilent CE system accessory kit |
| G7100-68723 | High Sensitivity Cell Kit |
| G7100-68750 | 280nm cIEF Filter |
| G7200-90211 | MassHunter User Guide (English) |
| G7200-92211 | MassHunter User Guide (German) |
| G7200-93211 | MassHunter User Guide (French) |
| G7200-94211 | MassHunter User Guide (Italian) |
| G7200-95211 | MassHunter User Guide (Spanish) |
| G7200-96211 | MassHunter User Guide (Japanese) |
| G7200-97211 | MassHunter User Guide (Chinese) |
| G7201-90200 | MassHunter WS User Guide |
| G7201-90203 | Masshunter WS (7700) User Guide-English |
| G7201-90204 | Masshunter WS (7700) User Guide-English |
| G7201-90301 | Masshunter WS (8800) User Guide-English |
| G7201-90302 | MassHunter WS (8800) User Guide-English |
| G7201-92200 | MassHunter WS Quick Start Guide - German |
| G7201-93200 | MassHunter WS Quick Start Guide - French |
| G7201-94200 | MassHunter WS Quick Start Guide - Italy |
| G7201-95200 | MassHunter WS Quick Start Guide - Spain |
| G7201-96200 | MassHunter WS User Guide (Japanese) |
| G7201-96203 | Masshunter WS (7700) User Guide-Japanese |
| G7201-96204 | Masshunter WS (7700) User Guide-Japanese |
| G7201-96301 | Masshunter WS (8800) User Guide-Japanese |
| G7201-96302 | MassHunter WS (8800) User Guide-Japanese |
| G7201-97200 | MassHunter WS User Guide (Chinese) |
| G7205-90000 | MassHunter chromatographic SW manual |
| G7205-96000 | MassHunter Chromatographic Software (JP) |
| G7206-90000 | MassHunter Inligent Seq SW manual |
| G7206-96000 | MassHunter Inligent Seq SW Man'l (JP) |
| G7207-90000 | MassHunter WS User Access Control Pack |
| G7207-96000 | MassHunter WS User Access Control Pk-JP |
| G8000-64112 | Pre-optic window for 4100 MP-AES |
| G8000-64140 | Torch clamp for 4100 MP-AES |
| G8000-64143 | Drain tube kit for 4100 MP-AES |
| G8000-68002 | Inlet cooling air filter for 4100 MP-AES |
| G8000-70002 | Easy-fit torch - 4100 MP-AES |
| G8000-70004 | Concentric nebulizer for MP-AES |
| G8001-64004 | Inlet air filter kit - 4107 N2 Generator |
| G8003-67000 | High sens. sample intro kit, MP-AES 1/pk |
| G8003-67001 | Std aqueous sample intro kit MP-AES 1/pk |
| G8003-67003 | Pump tubing kit MP-AES, organic solvents |
| G8003-70000 | Easy-fit torch for 4200 MP-AES |
| G8140-63000 | LC Vial Rack |
| G8400-00240 | Omega bias lens for 7900 ICP-MS w/x-lens |
| G8400-40113 | Sample tray for 7900 Series ICP-MS, 1/pk |
| G8400-60215 | Extraction lens 1, 7900 ICP-MS w/x-lens |
| G8400-60216 | Extraction lens 2, 7900 ICP-MS w/x-lens |
| G8400-60217 | Omega lens for x-lens, 7900 ICP-MS, 1/pk |
| G8400-60218 | Extraction lens 1, 7900 ICP-MS w/s-lens |
| G8400-60219 | Extraction lens 2, 7900 ICP-MS w/s-lens |
| G8400-60434 | Work coil assembly for 7900 ICP-MS, 1/pk |
| G8400-60624 | Skimmer base, stainless, 7900 w/x-lens |
| G8400-60625 | Skimmer base, brass, 7900 w/x-lens. 1/pk |
| G8400-60626 | Skimmer base, brass, 7900 w/s-lens. 1/pk |
| G8400-60627 | Skimmer base, stainless, 7900 w/s-lens. |
| G8400-60628 | Offset skimmer base assembly, 7900, 1/pk |
| G8400-67001 | Extraction-Omega lens assy 7900 w/x-lens |
| G8400-67002 | Extraction-Omega lens assy 7900 w/s-lens |
| G8400-67003 | Screw + spacer kit, 7900 ICP-MS w/x-lens |
| GT430-20470 | Nebulizer Adjustment Fixture |
| HARRICK-KBR-100 | KBR powder, 100 grams, 1/pk |
| MKI-C-QSC10 | Quick fit connectors,Markes Unity PK10 |
| MKI-MTD-1169 | Stainless Steel Difflok Cap,Markes Unity |
| MKI-MTD-1204 | SilcoSteel Difflok Cap,Markes Unity |
| MKI-U-COV06 | O-Rings,Markes 6mm Cold Trap Seals PK 10 |
| MKI-U-COV07 | O-Rings,markes 7mm Cold Trap Seals PK 10 |
| MKI-U-COV10 | O-Rings,010 Markes Unity 10 pk |
| MKI-U-DISK1 | PTFE Filter Disks,5.1mm Markes TD PK 10 |
| MKI-U-DISK3 | PTFE Filter Disks,6.3mm Markes TD PK 10 |
| MKI-U-T11GPC | Spare general purpose carbon cold trap |
| MKI-U-T11GPC-2S | Cold Trap,GP Carbon,C4/5-C30/32 UNITY 2 |
| MKI-U-T12ME | Cold Trap,materials emissions,UNITY |
| MKI-U-T12ME-2S | Cold Trap,materials emissions, UNITY 2 |
| MKI-U-T13DHS | Cold Trap for DHS application, Series 1 |
| MKI-U-T13DHS-2S | Cold Trap for DHS application, Series 2 |
| MKI-U-T15ATA-2S | Cold Trap, TO-15/TO-17 ait toxic,Unity 2 |
| MKI-U-T3ATX | Cold Trap,Air Toxics, C2-C14,Unity |
| MKI-U-T3ATX-2S | Cold Trap,Air Toxics,C2-C14,UNITY 2 |
| MKI-UTD-5064 | Cold Trap Alignment Tool,Markes Unity |
| MKI-UTD-5105 | Sampling Tube,Tenax TA,Markes Unity |
| MKI-Z-0285 | O-Ring insertion tool,Markes Unity TDI |
| MKI-Z-0351 | O-Ring extraction tool,Markes Unity TDI |
| PCG9312A2LL12DP | Load and Lock 12inch Distribution plate |
| PCG9312APLL12BRB | Load and Lock 12inch Bed retainer boss |
| PCG9312APLL12LFSB | Load and Lock 12in Lower frit seal body |
| PCG9312APLL12SAR | Load and Lock 12inch Seal adapter ring |
| PCG9312APLL12UFSB | Load and Lock 12inch Frit Seal body |
| PCG932A12102 | 2 LOAD and LOCK INLET DIST. PLATE |
| PCG932A2LL2IF | 2in Load and Lock Inlet Frit 2u |
| PCG932A2LL2OF | 2 LOAD and LOCK OUTLET FRIT 2 mic. |
| PCG932APLL2FSB | 2in Load and Lock Frit Seal Body - EK |
| PCG933A12202 | 3 LandL Outlet Dist Plate |
| PCG936A6LL6ECSR | Frit Gasket Seal PTFE |
| PCG936A6LL6SR | Sealing ring PTFE |
| PIKE-160-1009 | KBR window, 25 x 4mm, 6/pk |
| PIKE-160-1010 | KBR, 32x3 mm, undrilled, 6/pk |
| PIKE-160-1015 | KBR, 32x3 mm, drilled, 6/pk |
| PIKE-160-1125 | 32 x 3mm KRS-5, drilled, 1/pk |
| PIKE-160-1126 | KRS-5 32x3mm, undrilled, 1/pk |
| PIKE-160-1127 | 25 x 4 mm KRS-5 window, 1/pk |
| PIKE-160-1133 | 25 X 4MM KBR WINDOW |
| PIKE-160-8016 | Kcl, 100 gram chunks, 1/pk |
| PIKE-161-1903 | Spare anvils Evacuable llet Press 1/pk |
| PIKE-162-1320 | PTFE O-rings Demountable Liq. Cell 12/pk |
| PL0810-0012 | AUTOSAMPLER NEEDLES (PK OF 2) |
| PL0810-4002 | Filter magazine 2 um stainless steel |
| PL0860-0450 | Nebulizer assy,PL-ELS 2100,1/pk |
| PL0860-0550 | O-ring,nebulizer PL-ELS 2100,2/pk |
| PL0870-6020 | PLUNGER SEAL |
| PL0870-6050 | INLET CHECK VALVE ASSEMBLY |
| PL0870-6060 | OUTLET CHECK VALVE ASSEMBLY |
| PL0870-6110 | Solvent inlet filter |
| PL0870-6380 | HOUSING IN-LINE FILTER |
| PL0870-8110 | SYRINGE PUMP |
| PL0870-8130 | PL-AS 4 ml Needle Assembly |
| PL0870-8140 | PL-AS 2 ml Needle Assembly |
| PL0890-0495 | Exhaust Tube for G4260B/G4261B ELSD |
| PL0890-0500 | Exhaust waste tube G4260B/G4261B ELSD |
| PL0890-0640 | ELSD air adapter kit G4260B/G4261B ELSD |
| PL1-24966 | ADAPTER ASSY 14-4MM |
| PL1-25351 | BOTTLE TRAP ASSY |
| PL2-24961 | WASTE OUTLET |
| PL2-25099 | WASTE OUTLET |
| PL4-20877 | NEBULISER GAS TUBING |
| R000048602 | Hanger,prep col for mast,1in.OD,1/pk |
| R000048610 | Hanger,for col 4.6mm,1/4in.OD,1/pk |
| R000481802 | VALVE PRIME/PURGE SS 1/16in |
| R007000507 | MIXING SEAL RETAINER W FRIT TI 10U |
| R007015061 | Clamp, Column Valve |
| R007101408 | CARTRIDGE INLET CHK VLV 51025ML |
| R007101409 | CARTRIDGE OUTLET CHK VLV 51025ML |
| R007101413 | SEAL,PRESSURE,.088ID,HST,GRAPH.,5ML |
| R007101416 | Cartridge, CV inlet, 18BL, 50100ML, TI |
| R007101417 | CARTRIDGE,CVOUTLET,18BL,50100200ML,TI |
| R007101422 | BACK-UP SEAL, F 10ML SSWSSWTI |
| R007101632 | Seal Backup Ring for 50ml |
| R007101634 | HD HSTLOY SEAL F 5ML LIQ HEAD |
| R007101635 | UHD HSTLOY Seal F/ 5ml |
| R007101636 | GRAPHITE HSTLOY SEAL 10ML SS WSS WTI |
| R007101639 | UHD HSTLOY Seal 10ml SS, WSS WTI |
| R007101650 | Flanged UHD HSTLOY Seal 50ml WSS |
| R007101656 | FLANGED UHD KALREZ SEAL 100WP WTI |
| R007101657 | PISTON ASSY W SPRING F5ML SS LIQ HEAD |
| R007101658 | PISTON ASSY W SPRING F10ML SS LIQ HEAD |
| R007101708 | CARTRIDGE,CV INLET,1/8BL,10ML,EK |
| R007105603 | Outlet ftg SD-1 50/200ml/min sys,5/pk |
| R007105605 | OUTLET FITTINGS SD-1 500800ML 5PK |
| R007105613 | INLET FILTER TUBE SD1 500800ML 10FT |
| R007105685 | COMPLETE SEAL KIT FSD-1 800ML |
| R007105686 | INLET CHECK VALVE FSD-1 500800ML |
| R007105687 | OUTLET CHECK VALVE FSD-1 500800ML |
| RE7030 | Valve,Rheodyne 7030,3-way,SS,1/16in,1/p |
| SCAC04090 | Polishing kit lapping par, 5/pk |
| 5188-5367 | Gold Plated W/W 推薦5190-6144 |
| 5190-2209 | Gold Plated 10/pk 推薦 5190-6145 |