SANTEST_GYcAT位移傳感器_物位傳感器: 返回列表頁

舉報

參考價	面議

參考價

面議

具體成交價以合同協議為準

型號 GYcAT
品牌
廠商性質 經銷商
產品資料下載
所在地 上海市

在線詢價 收藏產品

更新時間：2018-01-27 08:47:00瀏覽次數：1392

聯系我們時請說明是化工儀器網上看到的信息,，謝謝!

原價	￥1500
參考價	￥1000	￥900	￥800
訂貨量	1-2000臺	2000-4000臺	4000-6000臺

同類優質產品

更多產品

產品分類 品牌分類

產品簡介

SANTEST_GYcAT位移傳感器_物位傳感器
SANTEST_GYcAT-Shanghai Hangou Mechanical And Electrical Equipment Co。,，Ltd
GYCAT是日本SANTEST公司生產的線性位移傳感器,，傳感器行程：15mm~2500mm，高精度,，高品質

詳細介紹

SANTEST_GYcAT位移傳感器_物位傳感器

SANTEST_GYcAT-Shanghai Hangou Mechanical And Electrical Equipment Co,。，Ltd

GYCAT是日本SANTEST公司生產的線性位移傳感器,，傳感器行程：15mm~2500mm,，高精度，高品質

Thanks to the Surface Mount Technology, the entire signal
processing electronics of GYcAT series is integrated into a
transducer head.
You can get a voltage or current analog signal proportional to a
magnet position only by applying a 24V dc power supply directly to
the transducer.
GYcAT series have alarm output and head is equipped with noise
cancellation functions.

Non-linearity	< ±0.05%FS TYP
Resolution	< 0.01%FS
Repeatability	< ±0.01%FS
Temp drift	40ppm FS/°C
Voltage output	0-10V or 10-0V / (output current:Max.5mA, load:Min.2kΩ)
Current output	4-20m or 20-4mA / (load:Min.500Ω)
Alarm output	Open collector　30V　0.1A
Power supply	+24 (±2) VDC (100mA)
Frequency response	Std 1kHz (depending on stroke) sampling
Admissible press.	35MPa (probe rod)
Operating Temp	-20°C-+65°C
Storage Temp	-40°C-+80°C
Vibration	6G (or 40Hz 2mmPP)
Shock	50G (2msec)
Protection	IP65

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Effective Stroke
15mm-2500mm

(2):Output
A:0-10V
B:4-20mA
C:others (bipolar etc)

(3):Direction of output
(toward probe tip)
D:output data increase
R:output data decrease

(4):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF

(5):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8

(6):Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
Connector:straight type
Connector:only counter connector is supplied. In case cable needed,specify cable length.

Dimensions

Connector type (Standard)

Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2P. Other magnets are available from Magnet Grouping [B].
The tip dead zone length (70mm) depends on the magnet or float type.
The length of the cable should be less than 10m in case of using the voltage output type
and 100m in case of using the current output type.
Connector:Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic)
Applied cable diameter:Φ6.6-Φ7.5
Wire size:Less than 0.5mm2

Connection
1 DC24V
2 NC
3 0V
4 SIG COM
5 Voltage output
6 (Current output)
7 Alarm output
*Shield should be connected with 0V at user sid