日韩av大片在线观看欧美成人不卡|午夜先锋看片|中国女人18毛片水多|免费xx高潮喷水|国产大片美女av|丰满老熟妇好大bbbbbbbbbbb|人妻上司四区|japanese人妻少妇乱中文|少妇做爰喷水高潮受不了|美女人妻被颜射的视频,亚洲国产精品久久艾草一,俄罗斯6一一11萝裸体自慰,午夜三级理论在线观看无码

STREXS是一種模擬細胞生長過程中機械應力的裝置。張力腔室中的細胞被儀器拉伸或壓縮,。施加在細胞上的機械應力更好的模擬了自然動態生理環境,，可精準控制施加在細胞上的應力級別。

細胞應力拉伸儀(STREX)的優勢

× 精準的應力程序設計

× 高頻率和低頻率處可實現連續拉伸/壓縮

× 培養腔室所受應力的均一性

× 橫向剪切力非常小

× 操作便捷

The exceptional physical and chemical properties of the silicone elastomer PDMS (polydimethylsiloxane) create a specially flexible thin-membrane chamber.

● High Reproducability：
Springy PDMS chambers bounce back from stretching and compression with their original properties intact. Thus, the chambers demonstrate good reproducibility in applications requiring continuous mechanical stretching over prolonged periods.

● Superior Transparency：
An optically transparent, ultra-thin (100-200 µm) membrane at the well bottom not only makes stretch chambers compatible with optical microscopy techniques, but with fluorescence detection and microscopy as well.

Uniformity of direction and force are issues of crucial concern in cell stretching. Stretching systems and chambers with insufficient properties can cause extraneous stretching on the wrong axis and generate a secondary load in that direction. In addition, these systems may not apply stress equally to all cells in the chamber, making it impossible to accuray gauge the effect of the stretch stimulus across the unevenly treated sample.

The STREX Cell Stretching System is designed to achieve stretching in a single, parallel direction, with only a very weak secondary load. Research has demonstrated that the STREX system enables highly reproducible cyclic stretching over prolonged periods at ratios of 1-20%.（Ref）

Because the methyl groups align themselves to the surface, the stretch chamber is highly water-repellent, meaning that cells will not adhere without pre-treatment of the chamber. Thus, the PDMS chamber surface needs to be coated with extracellular matrix in order to successfully adhere and culture cells. Fibronectin, collagen, gelatin and laminin, among others, can be used for this purpose.

STREX offers standard stretch chambers in two sizes, the 4cm² and 10cm² models. Specialized versions are also available, including multi-well, gel-stretching, and transwell experiment chambers.

(Ref) Naruse, K., Yamada, T., Sai, X.R., Hamaguchi, M., Sokabe, M. Pp125FAK is required for stretch dependent morphological response of endothelial cells. Oncogene 1998, 17:455-463.

Stretch Chambers

Compatible with STB-10-04 STB-140-04 STB-150 STB-195

Compatible with STB-10-10 STB-140-10

Compatible with

XY-biaxial stretching Effective size: 2.0×2.0×1.0cm

Compatible with STB-190-XY

Compatible with STB-10-10 STB-140-10

Note: Chamber specifications:

Heatproof temperature: 5℃-180℃, Humidity: 20-100％
Durability: 900,000cycles approx. (when stretching ratio=20％)

Note: Store unused chambers in a cool dark place. Chambers are denatured by UV-rays irradiation.

Chamber Stands

STB-CH-04ST-XX chamber stands
Note: "XX" denotes stretching ratio. ex)STB-CH-10ST-05: for use with 5% stretching ratio
Stretching stands for STB-CH-04.0

Compatible with holds 1 chamber, STB-CH-04

STB-CH-10ST-XX chamber stands
Note: "XX" denotes stretching ratio. ex)STB-CH-10ST-05: for use with 5% stretching ratio
Stretching stands for STB-CH-10.0

Compatible with holds 1 chamber, STB-CH-10

Coating Protocols for Stretch Chambers

Stretch chambers as sold are not sterile and provide no cell adhesion. Therefore, the chamber must first be autoclaved for 20 minutes at 121° C, and then the membrane must be coated with extracellular matrix before seeding cells.

Coating protocol: Fibronectin

1. Prepare a fibronectin solution by dissolving 0.05 mg/ml of fibronectin in PBS.
2. Place the stretch chamber in a culture dish and pour the fibronectin solution into the chamber well so that it compley covers the bottom surface.
3. Incubate the fibronectin-treated chamber in the culture dish at 37° C for at least four hours.
4. Remove the culture dish from incubator, and draw up any remaining solution from the chamber using a pipette or other suitable device.

Coating Protocol: Collagen

1. Prepare and autoclave a dilution of hydrochloric acid (pH3.0, 1mM).
2. Dilute type 1 collagen in the autoclaved hydrochloric acid.
3. Place the stretch chamber in a culture dish and pour the collagen solution into the chamber well so that it compley covers the bottom surface.
4. Cover the culture dish with a lid and incubate at 37° C for at least four hours.
5. Remove the culture dish from incubator, and leave to stand for a period. Then draw up the remaining solution from the chamber using a pipette or other suitable device.
6. Rinse the chamber twice with serum-free culture fluid to remove any excess collagen solution that may have remained after the above steps.

Coating protocol: Gelatin

1. Prepare a gelatin solution by dissolving 2% gelatin powder in PBS. Autoclave the gelatin solution
2. Place the stretch chamber in a culture dish and pour the gelatin solution into the chamber well so that it compley covers the bottom surface.
3. Incubate the gelatin-treated chamber in the in the culture dish at 37° C for at least four hours.
4. Remove the culture dish from incubator, and draw up any remaining solution from the chamber using a pipette or other suitable device.

Protocol of Fluorescent Staining after Stretching

1. Splice out cell plane from stretch chamber with surgical knife.
   (as large as approx. 0.8×0.5cm)->the size varies according to the size of container to be used since step 2.
   Splicing to make the longer side get along with the stretching direction makes it easy to find out the stretching direction afterwards.
   
2. put the membrane spliced in step 1 into the container with PBS(‐).
   (using 1×1 chamber(without frame) attached on a cover glass.） 
3. PBS(‐) wash, 2 times 
4. fix with 4% formalin solution in PBS(‐)->RT, 5 min, shake
5. PBS(‐) wash, RT, 5 min, 3 times 
6. 0.1% TritonX-100 in PBS(‐), pierce cell membrane->RT, 5 min, shake
7. PBS(-) wash->RT, 5 min, 3 times 
8. block 2% BSA in PBS(‐)->RT, 30 min, shake
9. primary antibody in 0.1%Tween20 in PBS(‐)->RT, 30min, shake
10. 0.1%Tween20 in PBS(‐) wash->RT, 5 min, 3 times
11. secondary antibody in 0.1%Tween20 in PBS(‐)->RT, 30 min, shake
12. 0.1%Tween20 in PBS(‐) wash->RT, 5 min, 3 times
13. put on a slide glass to enclose(Perma Fluor)->put the cell membrane side down
14. Fluorescent observation