Delivery System 小容量輸送系統SVDS2

Delivery System 小容量輸送系統SVDS2

小容量輸送系統SVDS2,，用于標準15ml管，來自

薩斯特德,。該系統采用8根錐底小塑料管和薄聚四氟乙烯管連接

你的設置,。帶有溶液的管子只需擰入保持架即可。解決方案很容易在

實驗,?？捎糜谖⑿推绻堋⒐嘧⑾到y(tǒng)和壓力控制器,。要求

加壓氣體輸送溶液,。也可以使用控制流量或真空來提取溶液

系統?？捎糜诔槲?。

該系統配備了所有必要的管道和配件，以連接到一個單一的壓力源,。小尺寸

200x25x25mm（不帶管）可將溶液放置在樣品附近,?？梢愿郊拥?/p>

一根1英尺長的桿（包括在內）,。帶有X形塊，可連接到標準0.5英寸,。站起來。包括可更換塑料

15ml管,、聚四氟乙烯管、接頭和連接到壓力源的管

所提供的配件允許您將導管直接連接到灌注系統的閥門,，并從

直接連接到閥組或定制管道和閥室的閥門。我們所有的流形都可以連接,，包括

零死容量,，luer鎖和微型單細胞灌注管匯。如圖所示,，是

SVDS2系統連接到PS-8H設置的夾管閥,。SVDS2的輸出然后進入ZMM流形

在培養皿內提供液體輸送和溶液交換，培養皿內插入PDI,。流出

通過MTH-S支架的吸入管提供,。物品#：SVDS2

 Small Volume Delivery System SVDS2 For use with standard 15ml tubes from
Sarstedt. This system utilizes eight small plastic tubes with conical bottom and thin PTFE tubing to connect
to your setup. Tubes with solutions are simply threaded into the holder. Solutions are easy to refill during the
experiment. Can be used with miniature manifolds, perfusion systems, and pressure controllers. Requires
pressurized gas to deliver the solutions. Solutions can be also withdrawn using controlled flow or vacuum
systems. Can be used to collect samples by aspiration.
The system comes with all necessary tubing and fitting to connect to a single pressure source. The small size
of 200x25x25mm (without tubes attached) allows to position solutions near your sample. Can be attached to
a 1 ft. rod (included). Comes with X-block to attach onto a standard 0.5 in. stand. Includes replaceable plastic
tubes 15ml, PTFE tubing, fitting and tubing to connect to a pressure source
Provided fitting allows you to connect tubes directly to valves of perfusion systems, and the output from
valves directly to the manifolds or custom tubing and chambers. All our manifolds can be connected, including
zero-dead volume, luer-lock, and miniature manifold for single cell perfusion. Shown on the picture, is
SVDS2 system connected to the pinch valves of PS-8H setup. Output from SVDS2 then goes to ZMM manifold
to provide liquid delivery and solution switching inside a Petri dish with PDI insert inside. The outflow
is provided through a suction tubing of MTH-S holder. Item#: SVDS2

 注：楊清辰發布