目錄:上海鉑勒機電設備有限公司>>水質分析儀器>>其他水質分析儀及配件>> D3455E7
Nominal Cell Constant （K） = 10.0, Sanitary （CIP） 2 inch Flange, 6m （20 ft） Analog Cable, 316 Stainless Steel Electrode, Includes Digital Gateway and 1m （3.3 ft） Digital Extension Cable
These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place （CIP）, and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant （Hach’s easy DRY-CAL™ method） when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.
These enhanced performance sensors measure from theoretically pure water （0.057 µS/cm or 18.2 MΩ） up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.
Sanitary clean in place （CIP） style sensors have 316 stainless steel electrodes and an integral 1-1/2-inch or 2-inch flange. These sensors can be installed using standard sanitary mounting hardware.
There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”
Includes: sensor with cable, digital gateway, extension cable and manual
Accuracy:± 2 % of reading above 200 µS/cm
Measuring Range:to
Operating Temperature Range:-20 to 200 °C
Pressure Limit:0 to 300 psi （20.7 BAR）
Repeatability:± 0.5 % of reading
Response Time T90:30 s of step change
Transmission Distance:100 m
14
化工儀器網