IEC 60068-2-11

本頁面標準信息均來源于網絡收集,，或由參與標準制定的供應商提供,，只作為參考使用，為確保測試結果的準確性,、節省您的時間,，如需IEC 60068-2-11標準詳細信息或IEC 60068-2-11具體測試方法，請與我們技術人員聯系或給我們留言,，我們將為您提供相關的技術支持,。

 

IEC 60068-2-11標準英文簡介

Can be used to test the relative resistance to corrosion of protective coatings, when exposed to a salt mist (spray) climate at an elevated temperature.

Test specimens are placed in an enclosed chamber and exposed to a continuous indirect spray of neutral (pH 6.5 to 7.2) salt water solution, which falls-out on to the specimens at a rate of 1.0 to 2.0ml/80cm²/hour, in a chamber temperature of +35C. This climate is maintained under constant steady state conditions. The test duration is variable.

This test is also referred to as a Neutral Salt Spray or NSS test.

kingjo-FOG鹽霧試驗箱用于IEC 60068-2-11鹽霧測試的流程

kingjo-FOG鹽霧試驗箱用于IEC 60068-2-11鹽霧測試的流程