ASTM F2366-05

本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供,，只作為參考使用,，為確保測試結果的準確性、節省您的時間,，如需ASTM F2366-05標準詳細信息或ASTM F2366-05具體測試方法,，請與我們技術人員聯系或給我們留言，我們將為您提供相關的技術支持,。

 

ASTM F2366-05是關于使用配備窗玻璃濾光器的氙燈設備測試噴墨印刷品的相對光穩定性的標準測試方法：

本測試方法規定了依照G151和G155測試方法對噴墨紙張印刷品進行氙燈曝露測試的具體程序和測試條件?，F(xiàn)行標準的版本是2012年修訂的ASTM F2366-12。

英文摘錄

1. Scope

1.1 This practice covers specific procedures and test conditions that are applicable for xenon-arc exposure of ink jet media prints conducted in accordance with Practices G151 and G155. The laboratory accelerated procedure is intended to determine the relative lightfastness of ink jet prints in office environments where window filtered daylight is used for illumination.

1.2 The two criteria used to determine relative lightfastness are instrumental color change and change in optical density.

1.3 This practice is useful in determining the relative lightfastness of a series of prints or the relation of the lightfastness of the print of interest to the performance of controls with known lightfastness exposed simultaneously.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in section 8.

1.5 There is no equivalent ISO standard.

2. Referenced Documents

ASTM Standards

D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

D3424 Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

E1347 Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

E1348 Test Method for Transmittance and Color by Spectrophotometry sing Hemispherical Geometry

E1349 Test Method for Reflectance Factor and Color by Spectrophotometry sing Bidirectional (45:0 or 0:45) Geometry

G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that se Laboratory Light Sources

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials