產品簡介
詳細介紹
可選實驗列表
序號 | 名稱 |
1 | 用自準法測薄凸透鏡的焦距 |
2 | 用貝塞耳法(兩次成像法)測薄凸透鏡焦距 |
3 | 由物鏡放大率測目鏡焦距 |
4 | 用物距-像距法測凹透鏡焦距 |
5 | 用物距-像距法測凸透鏡焦距 |
6 | 透鏡組節點和焦距的測定 |
7 | 觀察透鏡的6種像差 |
8 | 自組投影儀 |
9 | 自組帶正像棱鏡的望遠鏡 |
10 | 測自組望遠鏡的放大率 |
11 | 勞埃德鏡干涉 |
12 | 牛頓環 |
13 | 楊氏雙縫實驗 |
14 | 菲涅耳雙鏡干涉 |
15 | 菲涅耳雙棱鏡干涉 |
16 | 直邊菲涅耳衍射 |
17 | 夫瑯和費單縫衍射 |
18 | 菲涅耳單縫和圓孔衍射 |
19 | 夫瑯和費圓孔衍射 |
20 | 阿貝成像原理和空間濾波 |
21 | Θ調制 |
22 | 偏振光的產生和檢驗 |
基本配置和參數
<!--[if !supportLists]-->1,、<!--[endif]-->光學元件:
<!--[if !supportLists]-->(1)<!--[endif]-->材料:BK7,;
<!--[if !supportLists]-->(2)<!--[endif]-->焦距偏差:±2%,;
<!--[if !supportLists]-->(3)<!--[endif]-->直徑偏差:+0.0/-0.1mm,;
<!--[if !supportLists]-->(4)<!--[endif]-->有效孔徑:>80%;
<!--[if !supportLists]-->(5)<!--[endif]-->偏心:3’,;
<!--[if !supportLists]-->(6)<!--[endif]-->表面質量:60/40,;
<!--[if !supportLists]-->(7)<!--[endif]-->面型精度:λ/[email protected]
<!--[if !supportLists]-->2、<!--[endif]-->光源:
<!--[if !supportLists]-->(1)<!--[endif]-->He—Ne激光器,,TEM00模,,功率1.5~2.0mW,直流穩流電源供電保證功率穩定性,,防止光斑閃耀,,工作電流4.2mA。
<!--[if !supportLists]-->(2)<!--[endif]-->半導體激光器,中心波長650nm,,功率5nm,,帶俯仰回轉調節架。
<!--[if !supportLists]-->(3)<!--[endif]-->溴鎢燈,,亮度可調,,zui大功率35W,光譜范圍300nm~2500nm,。
<!--[if !supportLists]-->3,、<!--[endif]-->調整架:
<!--[if !supportLists]-->(1)<!--[endif]-->材料:高強度硬鋁合金,高強度,,耐熱,,內應力小,;
<!--[if !supportLists]-->(2)<!--[endif]-->表面亞光處理,,反射小,;
<!--[if !supportLists]-->(3)<!--[endif]-->高穩定旋鈕,,螺距0.25mm,調整精度高,。