日韩av大片在线观看欧美成人不卡|午夜先锋看片|中国女人18毛片水多|免费xx高潮喷水|国产大片美女av|丰满老熟妇好大bbbbbbbbbbb|人妻上司四区|japanese人妻少妇乱中文|少妇做爰喷水高潮受不了|美女人妻被颜射的视频,亚洲国产精品久久艾草一,俄罗斯6一一11萝裸体自慰,午夜三级理论在线观看无码

Features: 特點：

• Thrust loads up to 7600 lbs.推力負載高達七千六百英鎊,。
• Low torque required to drive the load due to high efficiency ball screw.低扭矩所需的驅動負載，由于高效率的滾珠絲杠,。
• Linear bearings provide low stick slip for precise positioning and ease of moving the load.直線軸承提供低堅持滑精確定位和方便移動的負載,。
• Precision linear rail system supports the load through the entire stroke length.精密直線導軌系統，支持通過整個行程長度的負荷。
• Rugged aluminum extrusion supports the linear rail system through the entire stroke length.堅固的鋁擠壓支持通過整個行程長度的直線鐵路系統,。
• Motor mounting for all NEMA 34 and 42 frame motors.汽車安裝所有的NEMA 34和42幀馬達,。
• NEMA standard gearheads mount directly to the unit. NEMA標準減速機直接安裝到單位。
• Stroke lengths to 11 feet.行程長度為11英尺,。
• NU-MATE mounting pattern is standard.努隊友安裝模式為標準,。
• Minimal deflection due to the square rail support system.由于zui小偏轉廣場鐵路的支持系統。
• Bellows available for severe duty applications.波紋管可用于嚴重責任的申請,。
• Recirculating twin ball tracks in the screw and on the rails provide greater accuracy.在循*螺桿雙軌道和在路軌上提供更大的準確性,。
• Load locking spring prevents load from free falling in the event the ball bearings are lost from the nut.負載鎖定春季阻止自由的球軸承是從螺母丟失下降負荷。
• Brush wipers prevent contaminants from entering the nut.刷雨刷防止污染物進入螺母,。

Features: 特點：

• Carriage: Load can mounted directly to the carriage, eliminates the need for support bearings and reduces overall length of the unit.運輸：負載可以直接安裝在運輸,，消除了支持軸承，并且降低了單位的總長度,。
• Bearings: Linear bearings provide low stick, slip for pecise postioning and ease of moving the load.軸承：直線軸承提供低棒,，防滑pecise postioning和方便移動的負載。
• Motor Mount: Mounting for all NEMA standard 23, 34, and 42 frame motors.馬達山：為所有NEMA標準23,，34和42幀電機安裝,。
• Thrust: Loads up to 1100 lbs.推力：負載可達1100磅。

Features: 特點：

• Carriage: Hardcoat anodized aluminum, lightweight, high durability NuMate™ direct mounting pattern, reduced cost for multi axis applications.運輸：硬膜陽極化鋁，重量輕,，高耐久性NuMate™直接安裝模式,，減少了多軸應用的成本。
• Ball Screw: Precision Rolled Thread accurate smooth motion, repeatable to +/-.005 long lasting, predictable performance, boot covers available.滾珠螺桿：軋制螺紋準確流暢的畫面,，重復的+ / -. 005持久,，可預測的性能，啟動精密包括可用,。
• Ball Nut: Easy access, total adjustability, factory or field installed.滾珠螺母：輕松訪問,，總調節功能,，在工廠或現場安裝。
• Guide Rods: （Two Choices） Hardened Steel hardness Rc 60-65, long life Hardened Stainless Steel hardness Rc 50-55, corrosion resistant precision ground & polished 15u RMS smooth cycling, low breakaway.導桿：（兩個選擇）淬硬鋼的硬度60-65鋼筋混凝土,，使用壽命長，硬化不銹鋼鋼筋混凝土50-55硬度,，耐腐蝕精密研磨和拋光15u有效值順利循環,，低分離。
• Bearings: （Two Choices） Four Linear Ball Bearings greatest load capacity, self-lubricating, built-in seals and wipers, self-aligning max.軸承：（兩個選擇）四直線軸承zui大承載能力,，自潤滑,，內置的密封和雨刷，調心zui大,。 speed 60"/sec... Four Frelon® Compounded Teflon®, self-lubricating, self-aligning, long service life, ideal for cleanroom max. speed 28"/sec.速度60“/秒...四黃蜂®復合特富龍®,，自潤滑，自調心,，使用壽命長,，潔凈室zui大。速度28”/秒的理想,。

Features: 特點：

• Body: Made from extruded aluminum, rigid, light weight, rigid design, internal stiffening ribs support carriage.身體：從擠壓鋁,，剛性，重量輕,，堅固的設計,，制造內部加勁肋支持運輸。 Side Slots for position switch mounting and foot mounting brackets.側槽,，開關安裝的位置和腳托架,。
• Carriage: Guided and Supported, body extrusion geometry, supports carriage motion.運輸：引導和支持，身體擠出幾何,，支持運輸的議案,。 Robalon™ Bearings synthetic bearing material for high speed applications, NuMate™ Direct Mounting Pattern, other Numatics Motion Control products mount directly to carriage without adapters or transition plates. Robalon™軸承高速應用合成軸承材料,，NuMate™直接安裝模式，其他紐曼帝克運動控制產品直接安裝無需適配器的運輸或過渡板,。
• Drive Belt: Steel Reinforced Polyurethane light weight, high strength, low stretch trapezoid profile eliminates slip, greater accuracy.皮帶：鋼筋聚氨酯重量輕,，高強度，低拉伸梯形配置消除滑,，更準確,。
• End Cap: Belt Tensioning System, easy access, easy adjustment.完第：皮帶張緊系統，方便,，調整方便,。
• Output Shaft: Dual Output Shaft accessible from both sides of body, motor mounting from both sides.輸出軸：雙輸出軸從身體兩側，方便安裝電機雙方,。

Features: 特點：

• 7 sizes with holding torque ratings from 68 to 1155oz-in （48 to 816 Ncm）. 7，持有規模從68扭矩評級一一五五盎司中（48至816 Ncm）,。
• NEMA 23 and 34 frame sizes available.類型NEMA 23和34幀尺寸可供選擇,。
• ± 2% typical step accuracy. ± 2％精度的典型步驟,。
• Operate in full-step （1.8°） or half-step （0.9°） increments.全操作步驟（1.8 °）或半步（0.9 °）增量。
• Can be microstepped to achieve increments as small as .0072°.可microstepped實現小至0.0072 °增量,。
• Can operate at rates to 20,000 steps per second （6000 rpm）.可以操作的速度每秒20,000（6000轉步驟）,。
• UL and Canadian Recognized. UL認證和加拿大的認可,。
• CE certification. CE認證。
• Can withstand over 2 times rated current without demagnetization.能承受超過2倍額定電流不退磁,。
• Motors available with optional encoder for closed loop applications.電機與閉環應用提供可選的編碼器。
• Wide range or windings available with 4 or 6 connections for use with bipolar or unipolar drives.繞組廣泛或有4個或6或單極與雙極驅動器使用的連接可用,。
• Rugged construction to provide long life.堅固的結構提供長期的生活,。
• Optional cast terminal box available.可選鑄鐵接線盒可用。

Epsilon 120-240V NT Motor Selection The NT motor is a high performance motor utilizing patented technology to maximize torque in a compact package. 小量120 - 240伏新臺幣電機選擇新臺幣電機是一種高性能的電機可以利用技術,，zui大限度地在一個緊湊封裝的扭矩,。 The NT motor uses powerful Neodymium magnets and manufactured with a segmented core to maximize stator efficiency. The NT motor has a very low inertia for applications that demand high accel and cycle rates.新臺幣電機采用了功能強大的釹磁鐵和核心的分段定子生產效率zui大化,。新臺幣電機有一個非常低的應用需求高的慣性加速度和周期率。 NT motors are available in English （NEMA 23 or 34） flanges, with or without brakes.新臺幣電機有英語（類型NEMA 23或34）法蘭,，帶或不帶剎車。 The standard encoder resolution is 2048 lines per rev.標準編碼器分辨率為2048轉速每行,。 NT motors are supplied with MS style connectors.新臺幣電動機提供與MS型連接器,。

Features: 特點：

• 90 to 264 VAC 1Ø input power. 90到264 VAC 1Ø輸入功率,。
• Up to 37 lb-in continuous torque截至到37磅的連續扭矩
• 1000 LPR differential encoder standard. 1000車牌差分編碼標準。
• Drive options: Base, Indexing, and Indexing with DeviceNet.驅動器選項：基地,，索引,，并與DeviceNet的索引。
• Compact, space saving design, six-inch （152mm） panel depth including cables.緊湊,，節省空間的設計，6英寸（152毫米）面板的深度,，包括電纜,。
• Pluggable connectors, Standard D-Shell andScrew Terminals.可插拔連接器,，標準D -殼牌andScrew碼頭,。
• State-Space Observer Control, which allows 10-1 inertia mismatch out of the box, and 50-1 with tuning.國家空間觀測控制，使開箱10-1慣性匹配,，和50-1連微調,。
• Free ServoPro software, and upgrades.免費ServoPro軟件和升級。
• Programmable, optically-isolated I/O.可編程,，光隔離I / O的
• RS-232/485 serial communication interface using Modbus protocol.個RS-232/485串行通信接口采用Modbus協議。
• 14-segment status and diagnostic display, time-stamping of last 10 faults for easy troubleshooting. 14段狀態和診斷顯示,，時間的過去1*排除故障方便沖壓,。
• Field programmable flash memory firmware （upgrades are free）.現場可編程閃存固件（升級是免費的）,。
• Auto-Tune support for any servo motor with encoder feedback.自動調為任何編碼器反饋伺服電機的支持。
• 24VDC auxiliary input for logic backup. 24Vdc的輔助輸入邏輯備份,。