張力儀是測量絲網受到拉力作用時其內部與固定絲網接觸體之間的相互牽引力大小的儀器。張力儀有機械式和電子式兩種,，測量張力的單位用牛頓/厘米表示,。張力也可以用相對數值來表示。厘米張力儀就是用相對數值表示張力的一種,，是通過張力儀自身重量使絲網下沉的深度的數值(毫米)來計算,，張力數值可從指示盤上直接得到，或者從控制盤上間接得到,。張力儀有手工操作和機械操作兩種,。張力儀是檢驗絲網印版質量的重要的檢測儀器。為保證得到制版要求的張力,，在繃網過程中或繃網后都要使用張力儀測量,。

德國Honigmann專注于卷材張力檢測和張力控制有超過60年歷史，是大張力測量儀表生產商,。旗下產品有張力計136-3適用于更大尺寸材料的張力檢測,，例如電纜，電線和繩索,。

16 Ranges Avail - Up to 1000 Kg (2200 lbs)
Cable Diameters - Up to 30 mm (1.25")

The new Honigmann 136-3 Hand-held Tension Meter is designed for use on larger diameter materials such as cables, large diameter wire, wire ropes and similar materials up to 30mm (1.25").

Schmidt136-3 It is designed to minimize the effects of different material rigidities when measuring on a variety of material sizes and also features a unique "tri-tens" system where the material can be threaded through the 3 rollers in 3 distinct patterns.

Each threading pattern provides a different multiplying factor. For instance, assuming the Threading Pattern "D" below, (where all 3 rollers are on the same side), versus Threading Pattern "E", where one roller is on one side and 2 rollers are on the other side. Pattern "E" provides a multiplier of approximately 5x compared to threading Pattern "D".

This permits the user to use the most appropriate threading pattern based on the tensions required for a specific material. In other words, the same hand-held sensor can be considered to have 3 different capacities, (depending upon threading pattern "D", "E" or "F). For example, when using a 400 mm wide outer roller bracket.

? 100 Lb Capacity when using "D"

? 25 Lb Capacity when using "E"

? 15 Lb Capacity when using "F"