Zero-Dead Volume Manifold, ZMM

Zero-Dead Volume Manifold, ZMM

零死體積流形

零死容量有助于小容量灌注室內的溶液交換。輸出通道

可在不同高度調節,，防止溶液污染,。較低的輸出

例如，濃縮溶液的位置可以更高,，這樣它們就不會與其他溶液混合

解決,。上部通道也可用于從小體積中抽吸多余的溶液

灌注室。

內置的磁性支架允許您將歧管放置在樣品周圍的任何位置,。二

拇指螺釘將歧管固定在所需位置：高度,、角度、長度,。配有2英尺長的特氟龍

管道,，連接至聚酰亞胺250/360微米內徑通道。所有管道都是可更換和可清洗的,。

需要灌注系統或/和加壓小容量輸送系統SVDS1,。可與

小容量PCCS2,、CSC室和培養皿插入物,。考慮使用微孔管接頭PS套件,。

船上配置了六個360微米的通道,，允許你做從1到6通道的歧管。

是否需要8通道250微米內徑通道,。項目#：ZMM

•通道：可拆卸6通道,，360微米

•連接管：包括2ft.管

每個通道，帶luer連接器

Zero-dead volume facilitates solution exchange inside small volume perfusion chambers. The output channels

can be adjusted at a different height to prevent contamination of solutions. The outputs for lower

concentration solutions, for example, can be positioned higher so that they do not mix with other

solutions. The upper channels can be also used to provide suction of excess of solution from small volume

perfusion chambers.

Incorporated magnetic holder allows you to position the manifold anywhere around your sample. Two

thumb screws fix the manifold in required position: height, angle, length. Comes with 2 ft. long Teflon

tubing, attached to polyimide 250/360 micron I.D. channels. All tubing is replaceable and washable.

Perfusion system or/and pressurized Small Volume Delivery System SVDS1 is required. Can be used with

small volume PCCS2, CSC chambers and petri dish inserts. Consider microbore tubing fitting PS-kit.

Ships configured with six 360micron channels, which allow you do make from 1 to 6-channel manifolds.

Specify if 8-channel 250 micron I.D. channels are required. Item#: ZMM

• Channels: removable 6-channel, 360 micron

• Connecting tubing: incorporates 2ft. tubing

per channel, with luer connector

注：楊清辰發布