Miniature Manifold微型歧管,，MMH-MM

Miniature Manifold微型歧管，MMH-MM

可調微定位器上的微型歧管,，MMH-MM

這種用于單細胞/小組織超融合的8通道微流形安裝在三維精細磁共振成像儀上-

定位器,，所有軸的工作距離為12mm，分辨率為微米,。如果你沒有磁鐵

表面上,，可以使用提供的螺釘適配器安裝組件。

微流形用于實現對小樣本（例如單細胞）的快速溶解應用,。

由于樣品體積小,，樣品周圍的溶液交換速度很快

微流形也提供了不污染整個浴室的優點，但適用于

局部的物質（只要灌注室經常清洗）,。有三個

360和250微米內徑的可更換螺紋,，用于單細胞和小組織超融合。合并

2英尺長的聚四氟乙烯管,，用于直接連接灌注系統,。內部聚四氟乙烯管易于

洗。螺紋可更換的是可清洗的，允許您使用帶有以下溶液的歧管

更高的壓力,。長度約為1英寸,，可切割至所需長度。合并

10cm長的4mm外徑桿安裝在微型機械手上,，7mm外徑適配器安裝在普通機械手上

操縱者,。包含八個獨立的頻道。如果與少于8種不同的解決方案一起使用,，則

可以用相同的溶液填充通道,，例如更快地沖洗。需要灌注

系統,?？捎糜谛∪萘總鬏斚到y(tǒng)SVDS1。包括兩個小噴嘴

容積室作為一個常規的流形（棒安裝在磁保持架MTH內）,。項目#：MMH-MM

•通道：8通道,，360微米

•輸出：可更換250和360微米

和兩個帶刺噴嘴

•三維調整：三個軸均為12mm，

微米分辨率,，Z軸傾斜調整

 Miniature Manifold on Adjustable Micropositioner, MMH-MM
This 8-channel micro-manifold for single cell/small tissue superfusion comes mounted on 3-D fine micr -
positioner with 12mm working distance in all axes and micron resolution. If you do not have a magnetic
surface, the assembly can be mounted using provided screws adapters.
Micro-manifolds are used to achieve fast solution application to small samples (single cells, for example).
Due to the small size of the sample, solution exchange around the sample can happen in as fast as few
ms. The micro-manifolds also offer advantage of not contaminating the whole bath chamber, but applying
the substances locally (provided that perfusion chamber is used with frequent wash). Comes with three
replaceable threaded tips of 360 and 250 micron I.D. for single cell and small tissue superfusion. Incorporates
2 ft. long Teflon tubing for direct connection to perfusion systems. Inside Teflon tubing is easy to
wash. The threaded replaceable tips are washable and allow you to use the manifold with solutions under
higher pressure. The length of tips is around 1 in., and can be cut to the required length. Incorporates
10cm long 4mm O.D. rod to mount on miniature manipulators and 7mm O.D. adapter to mount on regular
manipulators. Incorporates eight separate channels. If used with less than 8 different solutions, multiple
channels can be filled with the same solution, for faster wash-out for example. Requires a perfusion
system. Can be used with small volume delivery systems, SVDS1. Includes two nozzles to use with small
volume chambers as a regular manifold (the rod fits inside magnetic holders MTH). Item#: MMH-MM
• Channels: 8-channel, 360 micron
• Output: replaceable 250 and 360 micron
tips, and two barbed nozzles
• 3-D adjustment: 12mm in all three axes,
micron resolution, tilt adjust for Z-axis