Ultra-Thin Live Imaging超薄實時成像室

Ultra-Thin Live Imaging超薄實時成像室

超薄實時成像室通過放置一個薄墊片形成

兩個25毫米的蓋玻片之間,。小厚度為150微米。您可以使用

一些墊片,。內(nèi)部開口為21mm,。如有要求，可提供較小的開口

如果與光滑表面一起使用,，粘合墊圈形成密封室,。膠粘物很容易除去

使用。步驟：從膠墊上取下一層保護層,，將膠墊放在蓋玻片上方,；

取下第二層保護層；將樣品放入開口內(nèi),；用第二個蓋玻片蓋住,。

這些超薄的腔室可以與加熱腔室和普通的玻璃載玻片一起使用?？膳c

浸油光學和多光子成像這些膠層可以附著在任何光滑的

表面,?？膳cUTIC-25支架一起用于25毫米蓋玻片（見右側(cè)）。物品#：UTIC-21,，

UTIC-20-24x24,、UTIC-13-24x24

•光學間隙：21、20,、13 mm

•厚度：150微米

•工作容積：52,、47、20微升

Ultra-Thin Live Imaging Chamber The chamber is formed by putting a thin spacer
between two 25mm coverslips. The minimum thickness is 150 micron. You can change thickness by using
a number of spacers. The inside opening is 21mm. Smaller openings are available upon request The
adhesive gaskets form sealed chambers if used with smooth surfaces. The adhesive is easy to remove after
use. Procedure: remove one protective layer from adhesive gasket; position the gasket above the coverslip;
remove the second protective layer; put your sample inside the opening; cover with the second coverslip.
These ultra-thin chambers can be used with heated chambers and regular glass slides. Can be used with
oil-immersion optics and for multi-photon imaging These adhesive layers can be attached to any smooth
surface. Can be used with UTIC-25 holder for 25mm coverslips (see on the right). Item#: UTIC-21,
UTIC-20-24x24, UTIC-13-24x24
• Optical clearance: 21, 20, 13 mm
• Thickness: 150 micron
• Working volume: 52, 47, 20 microl

 注：楊清辰發(fā)布