114-34耐溶劑150歐姆/方形油墨

說明：114-34是一種耐溶劑導電油墨,，適用于絲網印刷

印刷電路線路,。本產品對卡普頓、聚酯薄膜,、玻璃和各種

其他基質,。與傳統的導電材料不同，這種產品對甲基乙基有很強的抵抗力

按鍵,。114-34的一些應用包括但不限于聚酰亞胺柔性材料的emi/rfi屏蔽

電路,，聚合物厚膜電路，薄膜開關,，表面安裝設備的電氣附件,，

以及鉭電容器的陽極涂層。114-34可與114-11混合,，以提供廣泛的

各種應用的導電水平,。

典型固化特性：

稠度光滑膏

填充碳

抗皺性佳

體積電阻（Ω-cm）0.40

片材電阻率，大值（Ω/sq./mil）150

可焊性編號

水解穩定性優異

有效溫度范圍（攝氏度）-55至175

熱穩定性（攝氏度）達到325

混合說明：在添加固化劑之前,，將114-34 A部分預混合在原容器中,。添加部件

B187或當需要快速固化時，將B1418添加到114-34中,，并攪拌至均勻,。注：對于

B-187或B1418的結晶發生。在水浴中加熱至40-45°C,，使材料返回

原始粘度,。催化劑的結晶對產品的性能沒有任何影響。

為防止再結晶,，將催化劑儲存在35-45°C之間,。

重量配比：114-34 A部分B-187 B-1418

100 2.00 2.00

固化說明：B187 B1418

處理性能：80°C時30分鐘，80°C時20分鐘

**：1小時,。@110°C 1/2小時,。@110攝氏度

儲存：在25°C的未開封容器中保存12個月,。

安全和操作：在通風良好的情況下使用,。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽,。用肥皂和水清洗皮膚,。

114-34耐溶劑150歐姆/方形油墨

114-34
SOLVENT-RESISTANT 150 OHM/SQUARE INK
DESCRIPTION: 114-34 is a solvent-resistant electrically conductive ink, and coating suitable for screenprinting
printed circuit lines. This product features excellent adhesion to Kapton, Mylar, glass and a variety of
other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl
keytone. Some applications for 114-34 include, but are not limited to, emi/rfi shielding of polyimide flexible
circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices,
and anode coatings for tantalum capacitors.114-34 may be blended with 114-11 to provide a wide range of
conductivity levels, for various applications.
TYPICAL CURED PROPERTIES:
Consistency Smooth Paste
Filler Carbon
Crease Resistance Excellent
Volume Resistance (Ω-cm) 0.40
Sheet Resistivity, max. (Ω/sq./mil) 150
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 175
Thermal Stability (°C) Good to 325
MIXING INSTRUCTIONS: Premix 114-34 part A in original container prior to adding curing agent. Add Part
B187 or when faster curing is needed add B1418 to 114-34 and mix until uniform. NOTE: It is not unusual for
crystallization of the B-187 or B1418 to occur. Warm to 40-45°C in a water bath to return the material to its
original viscosity. The crystallization of the catalyst does not effect the performance of the product in any way.
To prevent recrystallization, store the catalyst at temperatures between 35-45°C.
MIX RATIO BY WEIGHT: 114-34 part A B-187 B-1418
100 2.00 2.00

CURING INSTRUCTIONS: B187 B1418
Handling Properties: 30 min. @ 80°C 20 min. @ 80°C
Full Cure: 1 hr. @ 110°C 1/2 hr. @ 110°C
STORAGE: Shelf life: 12 months at 25°C in unopened containers.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.