125-13ELECTRICALLY CONDUCTIVE導電油墨

說明：125-13是一種導電油墨和涂料,，適用于屏幕應用

打印,、浸漬和注射器分配。,。與傳統導電材料不同,，125-13能夠

以非常精細的線條寬度和間距印刷,。本產品對卡普頓具有*的附著力，

聚脂薄膜,，ITO濺射表面,，玻璃和其他各種表面。這種產品對

彎曲和折痕,。125-13的一些應用包括但不限于

聚酰亞胺柔性電路,，聚合物厚膜電路，薄膜開關,。

典型固化特性：

稠度光滑膏

填充銀

銀百分比，*84

抗皺性佳

體積電阻率（Ω-cm）0.00004

片材電阻率（Ω/sq/mil）0.015

可焊性編號

水解穩定性優異

有效溫度范圍（℃）-55至+200

熱穩定性（攝氏度）達到325

濕覆蓋（in2

/gm/mil）22.6分

比重2.6

建議的處理和固化：125-13已準備好供應使用,。進一步變薄可能是

通過添加少量較薄的cmi 120-08來完成,。使用前一定要重新使用

銀色的。對于大多數應用而言,，在170°C至180°C下固化幾分鐘可獲得性能,。

通過在不同溫度下干燥和固化，可在多種基材上獲得良好的性能

50°C至150°C,。建議終用戶通過實驗確定適合

個人申請,。

貯存期：25℃下保存6個月；5℃下保存9個月,；或-10℃下保存12個月,。

安全和操作：在通風良好的情況下使用。遠離火花和明火,。避免

長時間接觸皮膚和吸入蒸汽,。用肥皂和水清洗皮膚。

125-13ELECTRICALLY CONDUCTIVE導電油墨

125-13
ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 125-13 is an electrically conductive ink and coating suitable for application by screen
printing, dipping and syringe dispensing. . Unlike conventional conductive materials, 125-13 is capable of
being printed at very fine line widths and spaces. This product features excellent adhesion to Kapton,
Mylar, ITO sputtered surfaces, glass and a variety of other surfaces. This product is very resistant to
flexing and creasing. Some applications for 125-13 include, but are not limited to, EMI/RFI shielding of
polyimide flexible circuits, polymer thick film circuitry, and membrane switches.
TYPICAL CURED PROPERTIES:
 Consistency Smooth Paste
 Filler Silver
 Percent Silver, cured 84
 Crease Resistance Excellent
 Volume Resistivity (Ω-cm) 0.00004
 Sheet Resistivity (Ω/sq/mil) 0.015
 Solderable No
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
 Thermal Stability (°C) Good to 325
Wet Coverage (in2
/gm/mil) 22.6
 Specific Gravity 2.6
SUGGESTED HANDLING & CURING: 125-13 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of thinner CMI# 120-08. Prior to using, be certain to resuspend
silver. Best properties, for most applications, result when cured for several minutes at 170°C to 180°C.
Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from
50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for
individual applications.
STORAGE: Shelf Life - 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.