PLC汽車內飾阻燃試驗機的詳細描述：

PLC automotive interior flame retardant testing machine details:
適用范圍：本燃燒試驗裝置適用于鑒別汽車（轎車,、多用乘客車,、載貨汽車和客車）內飾材料水平燃燒特性。

Automotive interior flame retardant testing machine for autos, cars, passenger cars, truck, passenger car, interior material level combustion characte
PLC汽車內飾阻燃試驗機滿足GB8410,、TL1010,、GM6090M,、DIN7520、GM9070P,、MVSS302的標準規定,。

Meet the standards of GB8410, TL1010, GM6090M, DIN7520, GM9070P, MVSS302.
A、  由不銹鋼箱制作,，長385mm,，進深204mm，高度360mm,；

Made by stainless steel, long box 385mm, depth 204mm, height 360mm;
B,、  燃燒箱底部設10個直徑19mm 的通風孔，四壁靠近頂部四周有寬13mm的通風槽,。

A ventilation hole is arranged at the bottom of the combustion chamber with a diameter of 10 19mm, the ventilation slot walls near the top around the width of 13mm.
C,、  整個燃燒箱由4只高10mm的支腳支承著。

The whole combustion chamber is supported by 4 high 10mm legs.
D,、  在燃燒箱頂部設有安插溫度計的小孔,，此孔設在頂部靠后中央部位，中心距后面板內側20mm,。

 in the combustion box at the top has placed a thermometer hole, the hole is located in near the top of the central part and center distance inside the panel 20mm.
4,、 煤氣燈噴咀內徑為9.5mm；

The gas burner diameter is 9.5mm;
5,、 噴咀口部中心處于試樣自由端中心以下19mm處,；

The center of the nozzle is in the center of the specimen free end 19mm;
6、 金屬梳的長度至少為110mm,，每25mm內有7~8個光滑圓齒,；

The length of the metal comb is at least 110mm, and each 25mm has a smooth round tooth 7~8;
7、 鋼板尺精度1mm,；

Steel plate ruler accuracy 1mm;
8,、電源AC：220V/50Hz
9、
氣源：煤氣或石油液化氣
10,、通風櫥：燃燒箱應放在通風櫥中,，通風櫥內部容積為燃燒箱體積的20~110倍，而且通風櫥的長,、寬,、高的任一尺寸不得超過另外兩尺寸中任一尺寸的2.5倍。（本儀器不配置,，客戶自備）
PLC automotive interior flame retardant test machine gas: gas or liquefied petroleum gas
10, ventilation cabinet: the combustion chamber should be placed in a fume hood, hood interior volume for the combustion chamber volume 20 to 110 times, and fume hood length, width, high with any size shall not more than 2.5 times of any size in the other two dimensions. (the instrument is not configured, the customer owned)